Contact Platform Support
Help CenterIndustrial Kaolin Drying Machine
Product Spotlights
2.Full lifecycle support
3.Performance optimization
4.Efficiency maximization
5.Cost minimization
6.Risk reduction
7.Production guarantee
Related Products
Industrial Kaolin Drying Machine
This industrial kaolin drying machine is a professional industrial drying equipment specially developed for the characteristics of kaolin clay, which is easy to agglomerate, sensitive to high temperature and requires no damage to its inherent mineral crystal structure. It covers models with hourly processing capacity from 3TPH to 60TPH, and can stably reduce the moisture of raw wet kaolin with 25%-40% initial water content to below 1%, with the system thermal efficiency as high as over 77%. The whiteness, particle fineness and activity of the dried finished kaolin are fully preserved, perfectly meeting the high-grade raw material standards for papermaking coating, high-end ceramics, paint filler and other industries.
Core Targeted Design Highlights
The equipment adopts a patented low-temperature gentle gradient heat exchange structure. The wet kaolin first enters the pre-dispersion crushing zone, where the high-speed hot air instantly breaks up the sticky kaolin clumps and evaporates most of the surface moisture, eliminating the viscosity in advance to avoid material agglomeration and adhesion to the drum wall. Then the material is fully lifted and scattered by the special non-damaging lifting plates in the main heat exchange zone, forming a uniform suspended material curtain that fully contacts with the hot air, making the heat exchange efficiency 2.3 times higher than that of traditional ordinary dryers. Finally, the material enters the constant-temperature stabilization zone, where the internal bound moisture is fully evaporated under precise low-temperature control, completely avoiding the problem of kaolin discoloration and crystal structure damage caused by local overheating. The built-in flue gas waste heat recovery system recycles more than 72% of the residual heat from the exhaust gas to preheat the incoming cold air, further reducing the comprehensive energy consumption by more than 40%.
Standout Practical Advantages
✅ No pollution to finished products: All parts in contact with materials are made of polished food-grade stainless steel, which completely avoids iron pollution and ensures the high whiteness of the finished kaolin.
✅ Ultra-high energy-saving performance: Compared with ordinary kaolin dryers, the unit energy consumption is reduced by more than 40%, saving hundreds of thousands of yuan in operating costs every year.
✅ Extremely low failure rate: The optimized transmission and anti-wear structure ensures a design service life of more than 15 years, with an annual failure rate controlled below 0.8%.
✅ High flexibility for multi-scenario adaptation: It supports a variety of heat source options such as natural gas, biomass, clean coal and industrial waste heat, and can be customized according to your on-site kaolin characteristics and product grade requirements.
This industrial kaolin drying machine has been verified by more than 110 stable industrial operation cases, with extremely reliable performance. We provide full one-stop services including free on-site survey, customized solution design, installation and commissioning, and 18-month full warranty. Contact our team immediately to get your exclusive detailed quotation and free project profit analysis report.
Technical Specifications
| Product Specs (m) | Capacity (T/H) | Main Motor Power (kW) | Main Motor Model | Main Gearbox Model | Ratio |
| φ1.2×10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-1 | - |
| φ1.5×12m | 3.3 - 4.9 | 10 | Y160L-6B3 | JZQ500-III-2F | - |
| φ1.5×15m | 4 - 6 | 18.5 | Y200L-6 | JZQ500-III-2F | - |
| φ1.8×12m | 4 - 6 | 11 | Y200L-6 | ZQ50-16II-2 | 16.46 |
| φ2.2×12m | 7 - 12 | 18.5 | Y160L-6 | JZQ650-III | 31.5 |
| φ2.2×14m | 7 - 12 | 18.5 | Y160L-6 | JZQ750-III | 31.5 |
| φ2.2×16m | 12 | 30 | Y225M-6 | JZQ750-III | 31.5 |
| φ2.4×14m | 12 | 30 | Y250M-6 | JZQ750-III | 31.5 |
| φ2.4×18m | 10 - 13 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ2.4×20m | 10 - 14 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ3×20m | 25 | 55 | Y250M-4 | ZL100-16-1 | 41.52 |
| φ3×25m | 32 - 36 | 75 | YR280M-4 | ZL100-16-1 | 41.52 |
8.
Send Inquiry to This Supplier
You May Also Like
-
Rotary Kiln for Gold Ore Roasting 100 TPDNegotiableMOQ: 1 Set
-
Rotary Kiln for Bentonite Activation 200 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Gypsum Calcination 300 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Phosphate Rock Calcination 500 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Silica Sand Processing 500 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Ceramic Material Calcination 200 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Cement Clinker Production 2000 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Cement Plant 1000 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Cement Production Line 1500 TpdNegotiableMOQ: 1 Set
-
Rotary Kiln for Clinker Burning System 2000 TpdNegotiableMOQ: 1 Set
