Contact Platform Support
Help CenterForged Vertical Inverted Bucket Steam Trap
Product Spotlights
Related Products
-
High Performance Carbon Steel Flange Ending Floating Steam Trap ValveNegotiableMOQ: 1 Piece -
TD42 Thermodynamic Disc Steam Trap for RefineryNegotiableMOQ: 1 Piece
-
FT44 WCB Stainless Steel Free Ball Float Steam Trap for RefineryNegotiableMOQ: 1 Piece
-
WDV CS41H-16C Free Float Steam Trap, Carbon Steel / Stainless Steel, For Chemical Processing, Nuclear Power, Food & Pharmaceutical ApplicationsNegotiableMOQ: 1 Set
-
OEM Inverted Bucket Steam Trap IB Series | High Efficiency Mechanical Steam Trap for Boiler Steam Line | Cast Steel Flanged Steam Trap ManufacturerNegotiableMOQ: 1 Piece
Inverted Bucket Trap
The interior of the inverted bucket steam trap:this valve adopts the operating principles of density difference between condensate water and steam,and the leverage system connects with inverted bucket to form its internal structure,thus controlling the open and close of the steam pressure.The interior of the inverted bucket steam trap is an inverted bucket,a liquid level sensitive part,with the bucket's opening downward.When the device just started,air and low temperature condensate water occur in the pipes,at the moment the steam trap opens thoroughly,the air and low-temperature condensate water are discharged rapidly and the temperature of the device rises immediately.When any steam enters into the inverted bucket,the bucket will obtain buoyancy and the fixed lever of the bucket drives the valve core to close the valve.There is small aperture on the inverted bucket,which can discharge air automatically.As some of steam is discharged from such aperture,while other steam produces condensate water.The inverted bucket loses the buoyancy and sinks down and its fixed lever drives the valve core to open the valve.When the steam re-enters into the bucket,the valve will close again.It repeats the said procedures to discharge water intermittently.
The inverted bucket steam trap is one of the most solid mechanical steam traps. It has the following advantages: it is not afraid of water hammer, can continuously discharge non condensing gas, and has good anti pollution performance; the maximum back pressure is ≥ 90%, all internal parts are made of stainless steel, wear-resistant and anti-corrosion; the ball valve core and valve seat are in line contact, with good sealing performance and long service life; intermittent drainage and continuous drainage It can discharge condensate close to saturation temperature and make heating equipment reach ideal working efficiency. The valve seat of inverted bucket steam trap is under the protection of water seal, and there is no live steam leakage during operation, so the effect of energy saving is good.
The product applies to such industrial steam heating equipment as petroleum,chemical,printing,paper making and pharmaceuticals and discharge of the steam pipe network.
Merits
1.Strong adaptability to happening of condensate water,capable of intermittent or continuous discharge.
2.Equipped with double-valve pressure differentiator and SCCV shutdown system,with small size but large discharge capacity.
3.All inner parts made of stainless steel and mounted on valve covers,easy to maintain and repair.
4.High backpressure rate of 90%.
5.Reliable separation of vapor and water (vapor enters from the lower part of the valve through the U-shape passage),the inner part of the valve is in water seal state,which effectively prevents the leakage of steam.
6.Water-resistant open floater with gas vent through the bucket's vent,effective to prevent steam locking or air blocking(except the non-confensed high-temperature air).
7.Suitable to be joined with lever mechanism for producing high-pressure valve.
Note
1.Please provide operating pressure and operating pressure difference,generating quantity of condensate water,operating temperature,connecting mode and standards in selecting product models.
2.The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3.Please make sure the drain valve is installed properly,maintained regularly,cleaned up and operates under the normal condition,so as to extend its service life.
4.The products with same mantissa figure at their models have the same discharge capacity.
Send Inquiry to This Supplier
You May Also Like
-
Wdv FT14 Lever Float Steam Trap | High Efficiency Ball Float Steam Trap for Heat Exchanger Boiler and Steam Heating SystemsNegotiableMOQ: 1 Piece
-
Wdv TD42 Thermodynamic Disc Steam Trap | Durable Mechanical Steam Trap for Steam Lines | High Efficiency Condensate DrainageNegotiableMOQ: 1 Piece
-
OEM Thermostatic Bellows Steam Trap | Stainless Steel Temperature Sensitive Steam Trap for Industrial Steam SystemsNegotiableMOQ: 1 Piece
-
Wdv BK Series Bimetallic Steam Trap | Durable Thermostatic Steam Trap for Steam Main, Steam Tracing and Industrial Heating SystemsNegotiableMOQ: 1 Piece
-
High Performancep Bellows Type Steam Trap Thermostatic Steam Trap for Steam PipelineNegotiableMOQ: 1 Piece
-
CA40 PN63 Stainless Steel Thermodynamic Steam Trap Valve 1 Inch Threaded High Pressure Steam DrainerNegotiableMOQ: 1 Piece
-
Thermodynamic Disc Steam Trap Flanged/Thread/Socket WeldNegotiableMOQ: 1 Piece
-
STEAM TRAP DN25/1INCH, THERMODYNAMIC, THREADED TYPE CONNECTION NPT, ASME CLASS 600 PN63/100 Preferred Brand: ARMSTRONGNegotiableMOQ: 1 Piece
-
FQ1steam Trap Flanged Ball Float Steam Valve (FT14-Flange) Steam TrapNegotiableMOQ: 1 Piece
-
Thermodynamic Disc Trap S31n Automatic Water Drain Steam Traps for Steam SystemNegotiableMOQ: 1 Piece
