Contact Platform Support
Help CenterDesulfurization Tower Frp Spray Layer, Flue Gas Desulfurization Frp Spray Pipe, Desulfurization Absorption Tower Pipeline Dn300
Related Products
-
Yike Frp Tanks, Horizontal Wound Frp Storage Tanks, Anti-corrosion Chemical Tanks (pictures and Videos)US$ 5384.62 - 6153.85MOQ: 1 Unit -
Frp Fiberglass Reinforced Plastic Waste Gas Scrubber, Acid-base Gas Absorption Tower, Process Waste Gas Treatment EquipmentUS$ 4615.38 - 5384.62MOQ: 1 Unit
-
Edi Fiberglass Reinforced Plastic Ultra-pure Water Tank, Ultra-pure Water Container, Pure Water Bucket and Tank With Sw901 Resin LiningUS$ 3076.92 - 3230.77MOQ: 1 Unit
-
ro Water Tank, Ultra-pure Water Frp Storage Tank, Nitrogen-sealed Water Tank, Water Storage Tank for Water Treatment in Electronic FactoriesUS$ 4000 - 4307.69MOQ: 1 Unit
-
Vertical Fiberglass Tank, Fiberglass Storage Tank for 31% Hydrochloric Acid With Supporting Ladder and GuardrailUS$ 4615.38 - 5384.62MOQ: 1 Unit
Desulfurization tower spray layer, FRP spray layer. The structure of the spray pipe winding layer is divided into three parts from the outside to the inside.
1. Wear-resistant layer: This part belongs to the outer structure of the winding layer and is composed of glass fiber surface mat, resin, and wear-resistant silicon carbide. Its main functions are corrosion resistance and wear resistance. The ratio of glass fiber surface mat: resin: silicon carbide in this layer is 1:57:38 (by mass), and the thickness is about 5mm.
2. Corrosion-resistant layer: This part is composed of a resin-rich layer and an intermediate layer, which are made of glass fiber surface mat and resin to form corrosion resistance and are located below the wear-resistant layer. The resin content of the resin-rich layer is greater than 90%, and the thickness is about 5mm; the resin content of the intermediate layer is 70% - 80%, and the thickness is about 3 - 4mm.
3. Reinforcement layer: This part is directly wound on the outer wall of the pipe. It is mainly designed to bear pressure and loads under other conditions. Its thickness is determined by calculation according to formula (1) based on the load conditions. The resin content of this layer is 30% - 40%, and it is composed of glass fiber, chopped fiber mat, and resin. It mainly meets the design requirements for stiffness and strength.
Send Inquiry to This Supplier
You May Also Like
-
Energy-saving Frp Waste Gas Scrubber, Can be Processed From Dn500 to Dn7500US$ 3964 - 3982.77MOQ: 1 Unit
-
Yike Boiler Desulfurization Tower Spray Layer Frp Spray Pipe With 200% Coverage DesignUS$ 1794.77 - 1828.92MOQ: 1 Unit
-
Yike 50-cubic-meter Fiberglass Reinforced Plastic (frp) Hydrochloric Acid Storage Tank, Vinyl Resin Wound Frp ContainerUS$ 7230.77 - 7846.15MOQ: 1 Cubic Meter
-
[buy! Buy! Buy!] Nanjing Desulfurization Tower Spray Layer - Model, Maintenance, CustomizationUS$ 1336.31 - 1362.46MOQ: 1 Unit
-
Fiberglass Reinforced Plastic (frp) Tail Gas Absorption Tower - Frp Tail Gas Absorption Tower - Parameters of Fiberglass Reinforced Plastic Tail Gas Absorption TowerUS$ 2907.38 - 3056.62MOQ: 1 Unit
-
Packed Frp Tail Gas Absorption Tower, Waste Gas Absorption Tower, Complete Acid Mist Purification EquipmentUS$ 7952.15 - 7979.38MOQ: 1 Unit
-
Frp Hydrochloric Acid Absorption Tower, Frp Energy-saving Washing Tower, Yike Brand Acid Mist PurifierUS$ 3000 - 3046.15MOQ: 1 Unit
-
Yike Frp Acid Mist Purification Tower, Acid-base Exhaust Gas Absorption Tower, Workshop Tail Gas Scrubber, Purification RateUS$ 1964 - 1982.77MOQ: 1 Unit
-
Specifications and Parameters of High-temperature Resistant Fiberglass Reinforced Plastic Waste Gas Absorption Tower and Acid-base Gas Purification TowerUS$ 6000 - 6153.85MOQ: 1 Unit
-
Silicon Carbide Wear-resistant Frp Spray Pipe, Oxidation Air Pipe, and Glass Fiber Reinforced Plastic Desulfurization Tower Spray Layer PipelineUS$ 1461.54 - 1507.69MOQ: 1 Set
