Contact Platform Support
Help CenterFoxboro FBM216 P0917TN I/O Module – Reliable 200 Series Field I/O for Process Automation
Related Products
-
FOXBORO FBM216b P0927AJ – Redundant Communication Input Interface Module for Reliable Field ConnectivityUS$ 2216.00MOQ: 1 Blade -
Foxboro FBM217 P0914TR – Fieldbus I/O Module for I/A Series Process ControlUS$ 2216.00MOQ: 1 Blade
-
Foxboro FBM218 – HART Communication Redundant Output Interface Module for Secure 4–20 mA ActuationUS$ 2216.00MOQ: 1 Blade
-
Foxboro FBM217 RH916XZ Discrete Input Interface Module – Reliable Digital Signal Acquisition for Foxboro DCSUS$ 2216.00MOQ: 1 Blade
-
Foxboro FBM218 P0917XV Discrete Output Interface Module – Reliable Digital Actuation for I/A SeriesUS$ 2216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment, full payment before delivery
Express options: FedEx, UPS, DHL
200 Series form factor – Slots into standard Foxboro FBM baseplates for straightforward system expansion or replacement.
Hot-swappable maintenance – Replace the module without shutting down the whole node; typically reduces downtime to minutes.
Robust signal handling – Well-suited for process analog I/O in many cases, ensuring stable data collection in harsh environments.
Redundant fieldbus support – Works within the Foxboro redundant I/O architecture to maintain high availability.
On-board diagnostics – Health and status indication helps maintenance teams pinpoint issues faster.
Secure, shielded wiring via terminal assemblies – Field terminations are handled by the matched TA, keeping noise low and wiring tidy.
| Brand / Model | Foxboro FBM216 (P0917TN) |
| HS Code | 8537.10 (Boards/panels for control of electricity, ≤1000 V) |
| Power Requirements | 24 VDC nominal via 200 Series baseplate; typical low-power FBM consumption |
| Dimensions & Weight | Standard 200 Series FBM module size; compact, panel-depth friendly |
| Operating Temperature | 0 to 60 °C (typical for FBM modules) |
| Signal Input/Output Types | Process I/O via matched Terminal Assembly; commonly used for analog process signals in Foxboro DCS |
| Communication Interfaces | Foxboro 200 Series Module Fieldbus via baseplate; supports redundant architecture |
| Installation Method | Hot-insertable FBM; mounts to 8- or 16-slot FBM baseplates; field wiring on TA |
Plants using Foxboro I/A Series or EcoStruxure Foxboro DCS where reliable field I/O is a must:
Oil & Gas – well pads, separators, and gas processing skids that need stable analog measurements.
Chemicals & Petrochem – reactor temperature/pressure loops and utility monitoring.
Power & Utilities – boiler, burner management auxiliaries, water treatment, and balance-of-plant signals.
Pharma & Food – regulated environments where downtime windows are tight and traceability matters.
Metals & Mining – rugged field conditions with noise and vibration where robust FBM design helps.
System compatibility – Designed for Foxboro 200 Series; no adapters required when the baseplate and TA match.
Lifecycle savings – Hot-swap capability and clear diagnostics typically cut mean time to repair.
Operational continuity – Works in redundant fieldbus nodes, improving overall availability.
Supported migration path – A practical choice for brownfield expansions or phased upgrades without a full DCS rip-and-replace.
A maintenance supervisor told us they swapped an FBM216 during a shift change and had the loop back within 10 minutes—no need to power down the entire cabinet. That’s the kind of small, real-world benefit that adds up across a site.
Installation & MaintenanceCabinet & mounting – Install on a Foxboro 200 Series baseplate in a grounded, ventilated control cabinet. Maintain adequate clearance for airflow and cable bend radius.
Wiring – Route shielded instrument cable; ground shields at one end. Keep power and signal cables segregated to minimize noise.
Power – Use the baseplate’s 24 VDC supply. Verify redundancy and health LEDs before and after insertion.
Safety – De-energize field circuits when landing or moving wires on the TA. Follow site lockout/tagout procedures.
Routine care – Check terminal tightness periodically, clean dust with dry air, and review diagnostics in the DCS. Firmware updates (when applicable) should be planned during maintenance windows.
Typically complies with CE requirements for EMC and safety; many installations also rely on UL/CSA approvals and RoHS conformity.
Manufacturer warranty practices vary by region; we provide a 365-day warranty on supply.
Send Inquiry to This Supplier
You May Also Like
-
Foxboro FBM218/237 P0916QD – Redundant Communication Output Interface Module for Reliable Third‑Party LinksUS$ 2216.00MOQ: 1 Blade
-
Foxboro FBM222 P0926TL Fieldbus Module – Robust I/A Series I/O for Reliable Plant ControlUS$ 2216.00MOQ: 1 Blade
-
Foxboro FBM219 (P0916RH) Discrete Input/Output Interface Module – Compact Digital I/O for I/A Series DCSUS$ 2216.00MOQ: 1 Blade
-
Foxboro FBM223 P0917HD Digital I/O Module – Reliable 24 VDC Discrete Signal Interface for I/A Series SystemsUS$ 2216.00MOQ: 1 Blade
-
FOXBORO FBM227 (P0927AC) Control System Module – 200 Series I/A Field I/O for Demanding PlantsUS$ 2560.00MOQ: 1 Blade
-
Foxboro FBM232 (P0926GW) Ethernet Communication Module – Reliable Dual-port Ethernet Interface for Foxboro 200 Series I/OUS$ 2560.00MOQ: 1 Blade
-
Foxboro FBM241 P0914TG – 8‑Channel Voltage Monitoring Module for I/A Series SystemsUS$ 2560.00MOQ: 1 Blade
-
Foxboro FBM240 P0917GZ Fieldbus Module – Reliable FOUNDATION Fieldbus H1 Integration for I/A Series SystemsUS$ 2560.00MOQ: 1 Blade
-
Foxboro FBM242 P0916NG Switch Terminal Block – Clean, Reliable Field Termination for Discrete InputsUS$ 2560.00MOQ: 1 Blade
-
Foxboro FBM242 P0916TA Discrete Output Interface Module – Dependable Digital Actuation for I/A Series ControlUS$ 2660MOQ: 1 Blade
