Contact Platform Support
Help CenterABB 5SHX19L6010 — Compact Low‑Voltage Motor Soft Starter for Industrial Drives
Related Products
-
ABB 5SHX2645L0001 — IGCT Power Module for Medium‑Voltage ConvertersNegotiableMOQ: 1 Combo -
ABB 5SHX3545L0016 / 3BHB020720R0002 — High‑Power IGCT Module for Industrial ConvertersNegotiableMOQ: 1 Combo
-
ABB 5SHY0660L0001 IGCT — High‑power IGCT Module for Medium/High‑Power ConvertersNegotiableMOQ: 1 Combo
-
ABB 5SHY3545L0001 — Asymmetric Thyristor IGCT for High-Power ConvertersNegotiableMOQ: 1 Combo
-
ABB 5SHY3545L0004 — Auxiliary Contact Module for Low-Voltage Motor ProtectionNegotiableMOQ: 1 Combo
The ABB 5SHX19L6010 is presented as a compact soft starter designed to reduce mechanical stress and inrush current when starting three‑phase induction motors. Typically used where smooth acceleration, basic motor protection and integration into existing control systems are needed, it seems to be a practical choice for pumps, fans, conveyors and small compressors. From my experience, these units are most useful when you want reliable motor control without the complexity of a full AC drive.
Smooth start/stop: Limits inrush current and torque peaks for reduced mechanical wear and extended equipment life.
Built‑in motor protection: Overload, phase loss and thermal protection functions typically included to protect the motor and feeder.
Bypass capability: Internal or external bypass contactor option to reduce heat and losses during steady operation.
Simple control I/O: Multiple configurable DI/DO channels and at least one analogue input for speed/torque control in typical setups.
Communications (optional): RS‑485 Modbus RTU is commonly supported; fieldbus options such as Profibus or Ethernet variants are often available.
Compact footprint: Panel mount design saves cabinet space and simplifies retrofit projects.
| Brand / Model | ABB 5SHX19L6010 |
| Power Requirements | 3‑phase 380–480 V AC ±10%, 50/60 Hz (typical) |
| Rated Motor Power (typical) | Up to ~30–55 kW range depending on final configuration and cooling |
| Dimensions & Weight | Approx. 250 × 180 × 140 mm; weight ~5–8 kg (model variant dependent) |
| Operating Temperature | -20 °C to +50 °C (derating above 40 °C is common) |
| Signal I/O Types | Digital inputs/outputs, relay outputs, analogue input (4–20 mA or 0–10 V typically) |
| Communication Interfaces | RS‑485 (Modbus RTU); optional modules for Profibus/Profinet/Ethernet/IP in many cases |
| Installation Method | Panel (cabinet) mount with DIN‑rail or screw mounting; adequate ventilation required |
One thing I appreciate is how these soft starters typically slot into existing motor control panels with minimal rewiring. You might notice that many integrators pick them when they need cost‑effective current limiting without the complexity of vector drives.
Application FieldsPumping stations and water treatment — reduces water hammer and protects pipes and seals.
HVAC fans and chillers — softer starts reduce belt slip and mechanical shock.
Conveyors and material handling — smoother acceleration reduces product spill and wear on gearboxes.
Compressors and mixers — limits torque spikes during start and improves uptime.
Example feedback from a field user: “Installed on two pump trains — starting current dropped noticeably and maintenance intervals lengthened. From my experience, the initial setup took about an hour and the built‑in protections helped catch a phase loss event within days.” This is fairly typical for installations of this class.
Advantages & ValueReliability: Robust solid‑state starting reduces mechanical wear and unplanned downtime in many cases.
Compatibility: Works with standard contactors and motor protection relays; communication options simplify PLC integration.
Cost savings: Lower initial cost than a full variable frequency drive and reduced maintenance costs over time.
Serviceability: Spare parts and firmware updates are typically available from ABB channels; local technical support often accessible.
Basic installation environment requirements: install inside a suitable electrical cabinet (IP20+ as required), maintain at least 50 mm clearance for ventilation, and provide filtered ventilation if ambient dust is high. Proper grounding and correct cable sizing are essential to avoid nuisance trips and overheating.
Wiring: Use short, separate power and control cable runs where possible; ferrules on control wires improve long‑term reliability.
Safety precautions: Lock out and tag out supply power before installation; confirm relay bypass circuits are de‑energized before servicing.
Routine maintenance: Periodic cleaning of cabinet ventilation, visual inspection of power connections, verify firmware and configuration after major plant changes, and functional testing of protective trip points (annually or per site practice).
Units of this type generally carry CE marking and comply with RoHS. Many ABB products also meet UL approvals and are manufactured under ISO 9001 quality systems. Manufacturer warranty terms typically run 12 months from shipment, though extended warranty and on‑site support options are often available through authorized channels. It’s advisable to confirm the exact certificate set and warranty terms for the specific 5SHX19L6010 serial batch.
If you need exact dimensions, current ratings or protocol modules for integration, I can pull the datasheet and configuration guide for the exact 5SHX19L6010 variant — in most cases those details clarify mounting cutouts and precise electrical ratings.
Send Inquiry to This Supplier
You May Also Like
-
ABB 5SHY3545L0006 — Auxiliary Contact Block for Motor Control and ProtectionNegotiableMOQ: 1 Combo
-
ABB 5SHY40L4511 IGCT Module — High‑power Turn‑off Thyristor for Industrial ConvertersNegotiableMOQ: 1 Combo
-
ABB 5SHY42L6500 — Asymmetric Thyristor IGCT for High-Power ConversionNegotiableMOQ: 1 Combo
-
ABB 5SHY50L5500 — Low-voltage Motor Drive for Precise Speed & Torque ControlNegotiableMOQ: 1 Combo
-
ABB 5SHY55L4500 — High-power Low-voltage Soft Starter for Large MotorsNegotiableMOQ: 1 Combo
-
ABB 81EU01E‑E (GJR2391500R1210) — Auxiliary/Status Module for Low‑Voltage SwitchgearNegotiableMOQ: 1 Combo
-
ABB S-093S (3BHB030475R0009) — Compact Servo Amplifier for Precision Motion ControlNegotiableMOQ: 1 Combo
-
ABB AFC094AE02 / HIEE200130R0002 — Drive Power/Control Module for Industrial Motor ControlNegotiableMOQ: 1 Combo
-
ABB AI810 (3BSE008516R1) — 8-Channel Analog Input Module for Industrial ControlNegotiableMOQ: 1 Combo
-
ABB ASE2UDC920AE01 — DC Control/Power Module for Drive Systems (S/N: 3BHB022793R0001)NegotiableMOQ: 1 Combo
