Contact Platform Support
Help CenterABB AFC094AE02 / HIEE200130R0002 — Drive Power/Control Module for Industrial Motor Control
Related Products
-
ABB AI810 (3BSE008516R1) — 8-Channel Analog Input Module for Industrial ControlNegotiableMOQ: 1 Combo -
ABB ASE2UDC920AE01 — DC Control/Power Module for Drive Systems (S/N: 3BHB022793R0001)NegotiableMOQ: 1 Combo
-
ABB ASFC-01C — Automatic Synchronizing & Frequency Controller for Generator Sets and MicrogridsNegotiableMOQ: 1 Combo
-
ABB AX670 (3BSE000566R1) — Modular Control/Interface Module for Drive & Automation SystemsNegotiableMOQ: 1 Combo
-
ABB AX722F (3BDH000377R0001) — I/O & Interface Module for ABB Control SystemsNegotiableMOQ: 1 Combo
A compact replacement module identified by ABB as AFC094AE02 (serial/component code HIEE200130R0002). Typically used as a module-level component inside ABB industrial drives or control cabinets, it appears to serve power/control duties for medium- to heavy-duty motor control applications. From my experience, units like this are most often supplied to repair shops and service engineers as direct-fit spares to restore drive functionality quickly.
Core summaryThe part is intended as a field-replaceable module for ABB drive systems — designed to minimize downtime when a drive board or power assembly fails. One thing I appreciate is that these modules typically match OEM form-factors and connectors, so repairs are straightforward in most retrofit or repair scenarios. You might notice that the exact electrical ratings are stamped on the module nameplate; confirm those against your drive before ordering or installing.
Key featuresOEM-fit design — Built to ABB mechanical and connector standards for plug-and-play replacement in compatible drive enclosures.
Robust construction — Components and PCB layout designed for industrial temperature and vibration environments.
Protection functions — Typically includes over-temperature and short-circuit protection at module level to safeguard the drive system.
Service-friendly — Marked connectors and mechanical fixings allow quicker swap-outs on-site, reducing MTTR in many cases.
Compatibility with control signals — Works with standard drive I/O (digital/analog inputs, relay outputs) and common bus interfaces when installed in the OEM system.
| Brand / Model | ABB AFC094AE02 (ID: HIEE200130R0002) |
| Power requirements | Module-level — consult the module nameplate and parent drive manual; typically installed within 3-phase low- or medium-voltage drive systems. |
| Dimensions & Weight | Form-factor matches ABB drive rack slot — exact dimensions on product label; typically compact PCB/module size for cabinet mounting. |
| Operating temperature | Industrial range (commonly -20°C to +60°C for electronics modules); refer to datasheet for precise values. |
| Signal I/O types | Typical: digital inputs, analog inputs, and relay outputs at module or drive level; exact pinout on label/schematic. |
| Communication interfaces | Operates within the parent drive's communications (Profibus, Modbus, EtherNet/IP, etc., via gateway/adapters where applicable). |
| Installation method | Module-mounted inside ABB drive cabinet or enclosure; secured with manufacturer fasteners and connected to drive harness. |
This module is typically deployed in manufacturing and process industries where ABB drives are used: conveyors and material handling, pumps and fans in water and wastewater, HVAC systems, mining and aggregates, and general motor control in steel or chemical plants. From my experience, service centers keep these kinds of parts on hand for rapid repairs on production-critical equipment.
Advantages & value for procurementLower downtime risk — Having a verified OEM module reduces lead time versus sending a whole drive out for repair.
Cost-effective repair — Replacing a failed module is often considerably cheaper than a full drive replacement in many cases.
Compatibility assurance — OEM part numbers like AFC094AE02 minimize integration issues if matched to the correct drive family.
Supportability — Modules typically accept the factory firmware and diagnostics tools, simplifying commissioning and troubleshooting.
Cabinet & ventilation — Install inside a clean, ventilated cabinet with appropriate IP rating and forced cooling if specified by the drive manual.
Wiring & grounding — Follow ABB installation diagrams: proper shielded signal wiring and single-point grounding help avoid EMI-related faults.
Safety precautions — De-energize DC link and mains, discharge capacitors, and lock out/tag out prior to module replacement. Use ESD protection when handling boards.
Routine maintenance — Periodic visual inspections, cleaning of heat sinks and fans, and verification of connector integrity. Perform firmware checks/updates using ABB service tools when available.
Units produced for ABB generally conform to standard industry certifications such as CE, RoHS, and are manufactured under ISO-compliant quality systems. Warranty is typically provided by the supplier or OEM — in many cases a standard 12-month warranty from commissioning is offered, though exact terms vary by seller and warrantor.
Typical user feedback (simulated)"Swapping the AFC094AE02 module cut our repair time from days to hours — the fit was exact and the drive came back to service immediately." — maintenance supervisor, paper mill.
"Delivery lead time was reasonable and the part matched the parent drive harness without rewiring." — field service engineer.
If you plan to order this item: confirm the exact module part number on your existing hardware, note any firmware or daughter-board options, and provide the drive serial and type to ensure full compatibility. In many cases, a short verification call with your service partner avoids costly returns.
Send Inquiry to This Supplier
You May Also Like
-
ABB B5LA HENF327886R0001 — Control Interface Module for Motor & PLC IntegrationNegotiableMOQ: 1 Combo
-
ABB S-093N (3BHB009885R0021) — Medium‑Duty Servo Motor for Motion ControlNegotiableMOQ: 1 Combo
-
ABB 12KG04G-V0002 (3EGM031400R0002) – Rotary Cam Switch for Reliable Machine Control and IsolationNegotiableMOQ: 1 Combo
-
ABB 12KG04J‑V0002 (Ordering Code: 3EGM031400R0002) – Industrial Control Module for ABB CabinetsNegotiableMOQ: 1 Combo
-
ABB 12KG04N-V0002 (3EGM031400R0002) – OEM Control/Automation Spare for Fast, Like‑for‑Like ReplacementNegotiableMOQ: 1 Combo
-
ABB 12KG04O‑V0002 (3EGM031400R0002) – OEM Control Module / Spare Part for ABB Industrial SystemsNegotiableMOQ: 1 Combo
-
ABB Bailey IEMMU21 Module Mounting Unit – Backplane Chassis for INFI 90/Harmony I/O ElectronicsNegotiableMOQ: 1 Combo
-
ABB Bailey IEPAS02 Power Module – Reliable Backplane Power for INFI 90 Process Control RacksNegotiableMOQ: 1 Combo
-
ABB Bailey IMCIS02 Control I/O Slave Module – Remote I/O Expansion for INFI 90 / Network 90 SystemsNegotiableMOQ: 1 Combo
-
ABB Bailey IIMCP01 Digital Input Module – Reliable Discrete Signal Acquisition for INFI 90/NET 90 SystemsNegotiableMOQ: 1 Combo
