Contact Platform Support
Help CenterABB 3BHB012961R0001 – OEM Drive Module/Board for Restoring Uptime in ABB Industrial Drives
Related Products
-
ABB 3BHB018104R0001 IGCT Module – High‑power Switching Element for Medium‑voltage Drives and ConvertersNegotiableMOQ: 1 Combo -
ABB 3BHB026114R0001 IGCT – High‑power Press‑pack Device for Medium‑voltage Drives and ConvertersNegotiableMOQ: 1 Combo
-
ABB 3BHD000892R0461 IGCT – High‑reliability Press‑pack IGCT for Medium‑voltage Drive and Converter StacksNegotiableMOQ: 1 Combo
-
ABB 3BHE004573R0142 (UFC760BE142) – Digital Control Board for UNITROL Excitation and MV Drive ControlNegotiableMOQ: 1 Combo
-
ABB UFC789AE101 (3BHE014023R0101) – Reliable Rack-mounted Controller Board for ABB Industrial Automation SystemsNegotiableMOQ: 1 Combo
The ABB 3BHB012961R0001 is an original ABB spare module/board designed for ABB industrial drive systems, used to replace aging or faulty assemblies and get a line back into production quickly. From my experience, parts in the 3BHB series are typically fitted inside medium to large ABB AC drive cabinets and work closely with the control and power stages. If you’re maintaining ACS/industrial drive fleets, this part seems to be a practical, form-fit-function replacement that reduces risk during maintenance windows.
Genuine ABB part – Ensures proper fit and electrical performance within ABB drive cabinets.
Form-fit-function replacement – Designed to drop in where the original board/module was installed, minimizing rewiring.
Compatibility by drive/frame – Typically used in ABB industrial drives; exact compatibility is confirmed by drive type code and serial.
Stable operation in harsh environments – Built for 24/7 duty cycles common in process lines and heavy industry.
Service-friendly – Standardized connectors and mounting points to simplify swap-outs during planned downtime.
Traceability – ABB labeling supports lifecycle tracking and maintenance records.
| Brand / Model | ABB / 3BHB012961R0001 |
| Product Type | Drive module/board (OEM spare part for ABB industrial drives) |
| Power Requirements | Powered by host drive assembly; no external supply required (refer to drive manual) |
| Signal I/O | Board-level connectors as per drive design (ribbon/plug/fiber where applicable) |
| Communication Interfaces | Follows host drive interface specification |
| Operating Temperature | Per drive system rating when installed inside a compliant enclosure |
| Installation Method | Internal cabinet mounting with standoffs/screws; ESD-safe handling required |
| Dimensions & Weight | Board-level assembly; varies by hardware revision |
This model is commonly used in ABB industrial drive systems supporting continuous processes. You might notice it specified in maintenance kits for:
Metals and mining (conveyors, crushers, hoists)
Pulp & paper (winders, calendars, process lines)
Oil & gas and chemicals (pumps, compressors, mixers)
Marine and port machinery (thrusters, winches)
Water and wastewater (high-power blowers and pumps)
Reduced downtime – A direct, compatible replacement typically keeps the repair inside a single shift.
Lower lifecycle cost – Replacing the board/module can defer a full drive replacement by years.
Risk control – No re-engineering of wiring or software when matched to the correct frame and revision.
Technical alignment – Works within ABB’s documented maintenance procedures and diagnostics.
A maintenance lead from a steel mill told us their swap of 3BHB-series boards took “under 40 minutes door-to-door” once the cabinet was isolated and grounded. That reflects what we typically see when spares are staged properly.
Environment – Install inside a compliant enclosure with adequate ventilation; maintain ambient and cabinet cleanliness according to the drive manual.
ESD & safety – De-energize, lockout/tagout, discharge DC bus, and use ESD protection when handling the board.
Wiring – Seat connectors fully; verify pin orientation; route fibers/ribbons per the original harness layout.
Commissioning – After replacement, run the drive’s self-tests and verify alarms/diagnostics. Back up and restore parameters if the procedure calls for it.
Routine care – Periodic cabinet cleaning (dry air), visual inspection for loose fasteners, and firmware/config checks as applicable to the host drive.
Manufactured under ABB quality systems (ISO 9001)
CE and RoHS compliance aligned with the host drive platform
UL/CSA recognition where applicable to the integrated drive system
Typical manufacturer warranty: 12 months for new ABB spare parts (warranty terms may vary by region and supply channel)
If you’d like us to validate fit for your exact drive, share the drive type code, frame size, and serial number. We can also recommend complementary spares—such as control boards, gate driver modules, and fiber links—that are commonly serviced together to avoid multiple shutdowns.
Send Inquiry to This Supplier
You May Also Like
-
ABB 3BHE017628R0102 PPD115A102 – Pulse Pattern Driver Board for Medium-Voltage Drive ControlNegotiableMOQ: 1 Combo
-
ABB 3BHE014105R0001 + 5SHY3545L0020 5SHX26L4510 – Gate Unit and IGCT Pair for Medium-voltage Drives and ConvertersNegotiableMOQ: 1 Combo
-
ABB 3BHE021951R0124 – OEM Control Board Module for ABB Industrial Drive and Control SystemsNegotiableMOQ: 1 Combo
-
ABB PPD113B03-26-100110 (3BHE023584R2634) – Control Board for ABB Drive and Excitation PlatformsNegotiableMOQ: 1 Combo
-
ABB 3BHE023584R1923 Control Board – Reliable Replacement Module for ABB Drive and Excitation PlatformsNegotiableMOQ: 1 Combo
-
ABB 3BHE023784R1010 – Control Board Module for Advanced Drive and Power Control SystemsNegotiableMOQ: 1 Combo
-
ABB 3BHE023784R2030 Control Board – Stable, Drop-in Spare for ABB Drive and Excitation PlatformsNegotiableMOQ: 1 Combo
-
ABB 3BHE023784R2630 – Control/Interface Board for ABB Medium-Voltage Drives and Excitation CabinetsNegotiableMOQ: 1 Combo
-
ABB 3BHE033067E0102 – Control/Interface Board for ABB Industrial Drive SystemsNegotiableMOQ: 1 Combo
-
ABB 3BHE033067R0103 – Control/Interface Board for ABB Drive and Control CabinetsNegotiableMOQ: 1 Combo
