LOCTITE SF 7109

LOCTITE SF 7109 is an activator used where increased cure speed of cyanoacrylate adhesives is required.

 It can be either pre- or post-applied to the bond. The product is non-flammable

Fixture time and cure speed achieved as a result of using LOCTITE SF 7109 depend on the adhesive used 

and the substrate bonded. The fixture time is defined as the time to develop a shear strength of 0.1 N/mm².

Technology                                               Activator for Cyanoacrylate Chemical 

Chemical Type                                           Amine (active ingredient)

Solvent                                                      Hydrofluoroether

Active Ingredient Concentration, %         0.6 to 0.85

Appearance                                              Colorless transparent liquid

Viscosity                                                   Very low

Application                                             CA adhesive cure accelerator

TYPICAL PROPERTIES

Specific Gravity @ 23 °C 1.42 

Viscosity, 25°C, mPa·s (cP): 0.87 

Drying Time @ 23°C, seconds ≤5 

On Part Life, minutes ≤1