ADDITION Chemical Stability of Refrigeration Oil Tester
Chemical Stability of Refrigeration Oil Tester
Product model: JF0698
Product Introduction
Metal materials such as steel and copper are put into special test tubes as catalysts, and a certain amount of refrigerating machine oil and refrigerant are injected in proportion, and then the test tubes are sealed. After heating the sealed test tube at a constant temperature for a predetermined time, the chemical stability of the refrigerator oil and the refrigerant was evaluated based on the appearance and color of the refrigerator oil and the catalyst. This instrument is suitable for refrigeration oil with R-12 or R-134a as refrigerant.
Technical Parameter
1. Applicable standard: SH/T0698
2. Heating method: Metal bath heating
3. Timing method: Digital display timer
4. Refrigeration method: Compressor refrigeration
5. Temperature control method: Digital display PID temperature controller

7. Vacuum display: Vacuum pressure gauge
8. Heating temperature: 175±1℃
9. Circulation mode: Magnetic pump circulation
10. Vacuum degree: 50μmHg
11. Power of the whole machine: 1500W
12. Working power supply: AC220V/50HZ
13. Instrument size: Low temperature bath: 670*910*520mm; 70KG
High temperature bath: 540*420*940mm; 50KG
14. HS Code: 9031809090
Performance characteristics
1. The glass test tube meets the standard requirements, made of borosilicate glass: 9×7×180mm
2. Double compressor cascade refrigeration, Dewar bottle is used as a cold bath, and the thermal insulation effect is good;
3. The refrigerant filling system has a filter drier, which can fill four test bottles;
4. The vacuum pressure ratio shows the degree of vacuum;
5. The metal heating aluminum block has 12 heating holes;
6. Metal wire: Ф1.6×50mm, copper wire Ф1.6×10mm;
7. The filling system is evacuated by a vacuum pump;
8. Microcomputer temperature controller, digital display, accuracy ±1℃ PT100 sensor;
9. Digital timer, record test time with alarm.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D217 ADDITION Needle and Cone Penetration Greases And Waxes TesterUS$ 3000 - 3500MOQ: 1 Piece
-
ADDITION Storage Stability of Diesel Oil TesterUS$ 5000 - 6000MOQ: 1 Piece
-
ASTM D4603 Viscosity of Polyethylene Terephthalate PET Tester Glass Capillary Viscometer MethodUS$ 6300 - 7000MOQ: 1 Piece
-
GB/T 11007 Automatic Electrolyte Conductivity TesterUS$ 11000 - 12000MOQ: 1 Piece
-
Automatic Nitrogen Content Tester Chemiluminescence MethodUS$ 35000 - 41000MOQ: 1 Piece
-
Nitrogen Content Tester Chemiluminescence MethodUS$ 15000 - 22000MOQ: 1 Piece
-
Corrosion Inhibition Performance of Water Treatment Agent Tester (Rotating Hanging Plate Method)US$ 6000 - 7000MOQ: 1 Piece
-
Total Nitrogen Content Tester (Chemiluminescence Method)US$ 20000 - 22000MOQ: 1 Piece
-
Automatic Total Nitrogen Content Tester (Chemiluminescence Method)US$ 39000 - 41000MOQ: 1 Piece
-
SH/T0361 Yuexiu Type Guide Oil Stick-Slip Property TesterUS$ 45000 - 49000MOQ: 1 Piece