1. Introduction
The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied to do the protection test against electric shock. During the test, the enclosure should have sufficient strength to withstand the damage of external forces and prevent electric shock damage, the hazard live parts shall not become accessible. The test request a directed outwards force of 20N should be applied to all points for 10s.
2. Specification
Length | 180mm |
Width | 8mm |
Length of hook | 5mm |
Thickness | 1mm |
Material | SUS304 |
Send Inquiry to This Supplier
You May Also Like
-
IEC60884-1 Test Probes for Socket-outlet No-accessibility of Live Parts Test Gauges Through ShuttersUS$ 60 - 500MOQ: 1 Piece
-
IEC60950-1 Test Probe Kits Includes Jointed Finger Probe Test Probe 13, TVN Test Probe and Wedge ProbeUS$ 60 - 500MOQ: 1 Piece
-
IEC 61032 Figure 6 12.5mm Test Probe 2US$ 60 - 500MOQ: 1 Piece
-
IEC61032 Figure 7 Unjointed Test Finger Probe 11 With 50N ThrusterUS$ 60 - 500MOQ: 1 Piece
-
IEC61032 Test Probe 12US$ 60 - 500MOQ: 1 Piece
-
IEC61032 Figure 9 Short Test Pin Probe 13US$ 60 - 500MOQ: 1 Piece
-
IEC61032 Figure 10 Test Probe 14US$ 60 - 500MOQ: 1 Piece
-
IEC61032 Figure 11 Test Probe 17US$ 60 - 500MOQ: 1 Piece
-
IEC61032 Figure 12 Child Finger Test Probe 18 With 8.6mm DiameterUS$ 60 - 500MOQ: 1 Piece
-
IEC61032 Figure 13 Child Finger Test Probe 19 With 5.6mm DiameterUS$ 60 - 500MOQ: 1 Piece
