Contact Platform Support
Help CenterASTM D2872 ADDITION Auto Asphalt Rotary Film Oven Rolling Thin Film Oven Test
Product Spotlights
Related Products
-
Automatic Quinoline and Toluene Insolubles Non-Toxicity TesterUS$ 28000 - 30000MOQ: 1 Piece -
ADDITION Auto Liquid Hydrocarbon Flash Vaporisation SamplerUS$ 5500 - 6000MOQ: 1 Piece
-
ASTM D665 ISO7120 DIN51585 ADDITION Rust-Preventing Characteristics TesterUS$ 3000 - 4000MOQ: 1 Piece
-
SH/T0698 ADDITION Chemical Stability of Refrigeration Oil TesterUS$ 14000 - 15700MOQ: 1 Piece
-
ASTM D4290 ADDITION Automotive Wheel Bearing Grease Leakage Tendencies Tester Under Accelerated ConditionsUS$ 8700 - 9800MOQ: 1 Piece
Asphalt Rotary Film Oven (Rolling Thin Film Oven Test)
Product model: JF0610
Product Introduction
This instrument is suitable for measuring the mass loss of road petroleum asphalt rotating film after heating. In order to evaluate the aging property of asphalt, the changes of the penetration, viscosity, ductility and brittleness of the asphalt residue after the rotating film is heated were measured.
Technical Parameter
1. Applicable standards: ASTM D2872, IS:15799, JTG E20-T 0610
2. Operating temperature: 163℃
3. Temperature control precision: ±0.5℃
4. Rotary speed: (15±0.2) r /min
5. Air flow: (4000±200) mL /min
6. Timing device: 85 minutes alarm
7. Working power supply: AC220,240V/50,60HZ
8. Heating power: 2400W
9. Ambient temperature :(5~50)℃
10. Relative humidity: 85%
11. Power consumption: No more than 2.6kW
12. HS Code: 9027899090
Main Feature
1. The oven is mainly composed of electrical control part, oven studio and mechanical transmission device. The constant temperature room is equipped with lighting to facilitate outdoor observation of indoor working conditions.
2. Electromagnetic air compressor, reducer motor system, to meet the test required air flow and turntable speed requirements.
3. Intelligent temperature control instrument, to ensure that meet the requirements of the test procedures, the sample installed after the oven temperature within 10 minutes to reach 163℃±0.5℃ technical indicators.
Send Inquiry to This Supplier
You May Also Like
-
Rubber Antiaging Agent, Vulcanization Accelerator Electric Melting Point TesterUS$ 2700 - 3000MOQ: 1 Piece
-
Rubber Anti-aging Agent, Curing Accelerator Freezing Point (Crystallization Point) TesterUS$ 4500 - 5000MOQ: 1 Piece
-
SH/T0259 Thermal Oxygen Stability of Lubricating Oil TesterUS$ 2300 - 2600MOQ: 1 Piece
-
IEC60628 Gassing of Insulating Liquids Under Electrical Stress and Ionization TesterUS$ 17000 - 18000MOQ: 1 Piece
-
ASTM D217 ADDITION Needle and Cone Penetration Greases And Waxes TesterUS$ 3000 - 3500MOQ: 1 Piece
-
SH/T0238 ADDITION Storage Stability of Diesel Oil Tester Sediment Test DeviceUS$ 5000 - 6000MOQ: 1 Piece
-
ASTM D4603 Viscosity of Polyethylene Terephthalate PET Tester Glass Capillary Viscometer MethodUS$ 6300 - 7000MOQ: 1 Piece
-
GB/T 11007 Automatic Electrolyte Conductivity TesterUS$ 11000 - 12000MOQ: 1 Piece
-
ASTM D6069 Automatic Nitrogen Content Tester Chemiluminescence MethodUS$ 35000 - 41000MOQ: 1 Piece
-
ASTM D6069 Nitrogen Content Tester Chemiluminescence MethodUS$ 15000 - 22000MOQ: 1 Piece
