Contact Platform Support
Help CenterIEC 60529 IPX3/4 Spray Nozzle Test Equipment
Related Products
-
IEC 60529 IPX3 and IPX4 Oscillating Tube Waterproof Testing Machine for Testing LuminaireUS$ 5000 - 10000MOQ: 1 Set -
IEC 60529 Hand-Held IPX3/4 Water Spray NozzleUS$ 500 - 1000MOQ: 1 Piece
-
IEC 60529 IPX5/6 Hand-Held Jet NozzleUS$ 300 - 1000MOQ: 1 Piece
-
IEC 60529 IPX5 and IPX6 Jet Nozzles Waterproof Testing Equipment With 6.3mm and 12.5mm NozzlesUS$ 5000 - 10000MOQ: 1 Set
-
UL 60507 Water Spray Test Equipment With 3pcs UL Water Spray HeadsUS$ 2000 - 5000MOQ: 1 Set
1. Introduction
IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The equipment is consisted by spray nozzle, water tank and control box. This equipment is to simulate the raining conditions to check the physical performance of outdoor luminaires, household appliance, auto parts and etc.
2. Features
● For IPX3 and IPX4 tests.
● The spray nozzle is processed by CNC technology, the head is made of pure brass, and the surface is mirror-polished. The moving shield is made of aluminum, and the other parts are made of SUS304 stainless steel.
● The surface of the nozzle head is sprayed with an anti-rust coating, which can effectively prevent the watermark on the surface of the nozzle from producing patina and affecting the appearance.
● The spray nozzle has 121 holes with diameter 0.5mm (1 hole at center, 2 inner circles of 12 holes at 300 pitch, 4 outer circles of 24 holes at 150pitch), completely meet the requirement of IEC60529.
● The control box includes timer, power switch button, emergency stop button, start button and flowmeter.
3. Specification
Model |
IPX34AS |
Outer size (L*W*H) |
870mm*600mm*950mm (control box) 370mm*115mm*165mm (spray nozzle) |
Spray nozzle diameter |
102mm |
Number of holes |
121 |
Hole diameter |
Φ0.5mm |
Holes position |
1 hole at center 2 inner circles of 12 holes at 300 pitch 4 outer circles of 24 holes at 150pitch |
Outer diameter of water inlet |
Φ16mm |
Outer diameter of water pipe |
Φ28mm |
Flow rate |
10L/min±5% |
Flowmeter adjustment method |
Manual adjustment |
Water pressure range |
50-150Kpa |
Flowmeter display |
Glass flow meter |
Capacity of water tank |
150L |
Working power |
220V/50Hz |
Water source |
1. The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet. 2. The faucet is not more than 2 meters away from the equipment |
Requirement for the site |
The ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set |
Send Inquiry to This Supplier
You May Also Like
-
JIS D0203 Spray Nozzle and Rain Nozzle Test Chamber With IPX34 Oscillating TubeUS$ 5000 - 10000MOQ: 1 Set
-
IEC 60529 IP5X and IP6X Sand and Dust Test Chamber for Testing Led Lamps and Street LightsUS$ 5000 - 10000MOQ: 1 Set
-
ISO 16750-4 Ice Water Splash Test ChamberUS$ 5000 - 15000MOQ: 1 Set
-
IEC 60529 IPX3-6 Waterproof Test Chamber With IPX34 Oscillating Tube and IPX56 Jet NozzlesUS$ 5000 - 15000MOQ: 1 Set
-
IEC 60529 IPX12 IPX34 IPX56 IPX9K Waterproof Test Chamber for Testing Auto PartsUS$ 5000 - 15000MOQ: 1 Set
-
IEC 60529 IPX7 Immersion Water TankUS$ 3000 - 10000MOQ: 1 Set
-
IEC 60529 IPX8 High Pressure Water Tanks Made by SUS304 Stainless SteelUS$ 3000 - 10000MOQ: 1 Set
-
IEC 60529 IPX1 and IPX2 Vertical Rain Drip Box Waterproof Testing EquipmentUS$ 5000 - 10000MOQ: 1 Set
-
IEC 60529 Wall-Hung Type IPX1 and IPX2 Vertical Rain Drip Box Waterproof Testing MachineUS$ 5000 - 10000MOQ: 1 Set
-
IEC 60529 PLC Type IPX1 and IPX2 Vertical Rain Drip Box Test ChamberUS$ 5000 - 10000MOQ: 1 Set
