Contact Platform Support
Help Center
Related Products
-
IPX3/IPX4 Hand-held Water Spray Nozzle Test Device IEC 60529US$ 738.95 - 750MOQ: 1 Piece -
Wedge Probe of IEC 62368-1 Figure V.4 for Slot Openings TestUS$ 660 - 700MOQ: 1 Piece
-
1MHz Low Noise Voltage Preamplifier PA560 3nV/√Hz Input NoiseUS$ 3000 - 3200MOQ: 1 Piece
-
Handheld Leaf Wetness Tester, 0~100%, RS485 InterfaceUS$ 245 - 280MOQ: 1 Set
-
LWS-10 Leaf Wetness Sensor，SDI-12 Interface，0~100%US$ 150 - 300MOQ: 1 Piece
IPX5 IPX6 Spray Hose Nozzle Tester
Specifications
internal diameter of the nozzle:6.3mm
--delivery rate:12.5/min+/- 5%
--water pressure:to be adjusted to achieve the specified delivery rate
--Core of the substantial stream: circle of approximately 40mm diameter at 2.5 distance from nozzle
--Test duration per square meter of enclosure surface area likely to be sprayed :1mm
--Minimum test duration :3min
--Distance from nozzle to enclosure surface:between2.5 and 3m
Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve.The interchangeable nozzles assemble easily to the jet handle.
The nozzles are made from stainless steel.
Pressure Gauge | 0 - 1.6 bar |
Nozzle Diameter | 6.3mm(IPX5) ; 12.5mm(IPX6) |
Material | Stainless steel nozzle |
Reference standards | IEC60529 IPX5 IPX6, IEC60598-1 IEC 60335-1,IEC60745-1 |
Send Inquiry to This Supplier
You May Also Like
-
LWS-10 Leaf Wetness Sensor，RS485，0-2V，4-20mAUS$ 130 - 260MOQ: 1 Piece
-
CO2 Carbon Dioxide Sensor Transmitter, RS485 Modbus，Voltage 0-2V，Current 4-20mAUS$ 160 - 260MOQ: 1 Piece
-
ISO20957-1 Figure 1 Test Finger Φ9.5mmUS$ 110 - 170MOQ: 1 Piece
-
IEC 62368-1 Figure 47 Steel Disc for Temperature Rise TestUS$ 180 - 240MOQ: 1 Piece
-
IEC62368-1 Figure 48 Aluminium Ring With K Type ThermocoupleUS$ 180 - 240MOQ: 1 Piece
-
IEC 62368-1 Figure 49 Aluminium Foil With J Type ThermocoupleUS$ 180 - 240MOQ: 1 Piece
-
IEC 62368-1 Annex T Steel Sphere 50 mm Diameter & 500 g MassUS$ 83 - 100MOQ: 1 Piece
-
IEC 62133-1:2017 Battery Ingestion Gauge for Figure 2US$ 150 - 200MOQ: 1 Piece
-
IEC 60598-1:2020 Luminaires Test Chain for Figure 29 63% Cu/37% ZnUS$ 280 - 350MOQ: 1 Piece
-
BS1363-2 Test Pin With Force 5N for Figure 1US$ 228 - 250MOQ: 1 Piece
