ZIPO 2BV Water Circulation Vacuum Pump
- 1000 Piece / Pieces per Month
- Shanghai Seaport
- T/T L/C PayPal Cash
- 25 days
- ZIPO brand CQB Magnetic Drive Pump or Magnetic Vortex Pump
- ZIPO Brand Pneumatic or Electric Diaphragm Pump
- Single seal face cartridge mechanical seal WJ-120 for slurry pump 50ZSP-34 or 50ZSP-39
- Double seal face cartridge mechanical seal for forced circulation pumps or axial flow pumps
- ZCMSD type double seal-face wear-resistant hard alloy cartridge mechanical seal for slurry or mud pump with external flushing
- ZCMSS type single seal face mechanical seals for chemical pumps or slurry pumps
Product Details
Brand Name: | ZIPO | Place of Origin: | China | Model Number: | 2BV |
Application: | Other, air | Fuel: | Other, air | Power: | Electric |
Usage: | Air Pump | Theory: | Vacuum Pump | Standard or Nonstandard: | Standard |
Structure: | Other, Water Circulation | Pressure: | Low Pressure |
Product Description
ZIPO 2BV Water Circulation Vacuum Pump
Contact: Email: zipopvf@163.com Wechat: zipo2019; QQ: 2191417589; Mobile: 18081659672
Before consulting or purchasing, please inform us of accurate parameters such as vacuum degree unit, vacuum pumping speed, motor power, caliber, rotational speed, and operating conditions.
2BV water circulation vacuum pump is a single stage pump with an integral structure - the pump is coaxial. The shaft seal adopts a mechanical seal, which has the characteristics of simple structure, easy installation, oil free, and performance.
2BV water circulation vacuum pump is suitable for extracting gas and moist steam, with an suction pressure of up to 33 mbar absolute pressure (97% vacuum). When the water circulation vacuum pump operates for a long time at a suction pressure below 80 mbar, a cavitation protection pipe should be connected to protect the pump. If the water circulation vacuum pump is equipped with an air injection device, the suction pressure can reach 10 mbar, and the injection device can be directly installed on the suction port of the vacuum pump when used as a compressor, its pressure can reach 0.26 MPa (absolute pressure).
2BV water circulation vacuum pump and compressor are widely used in fields such as petroleum, chemical, pharmaceutical, food, and sugar industries. Due to the isothermal compression process of gas during work, it is less prone to accidents when compressing and extracting flammable and explosive gases, making its application more widespread.
Equipment Installation of 2BV water circulation vacuum pump
1. Vaccuum pumpump Installation: When installing the water circulation vacuum pump and compressor, the installation surface must be horizontal and firmly installed with bolts through the holes at the bottom corner. To prevent welding slag from entering the vacuum pump during installation, a filter screen should be installed on the suction pipe during installation.
2. Gas-water separator installation: The gas-water separator can be directly installed on the exhaust port of the water circulation vacuum pump and fixed firmly with bolts. The gas-water separator has a pipeline connected to the pump, which supplies the working water demand of the water circulation vacuum pump. The remaining working water is supplied by the water supply pipe, and the water supply volume is adjusted by the valve on the pipeline. A check valve should be installed on the intake pipe of the water circulation vacuum pump or compressor to prevent the water in the vacuum pump or compressor from returning to the system under the pressure of the exhaust pipe during shutdown.
Starting and Stopping of 2BV water circulation vacuum pump
1. Starting: Before starting water circulation vacuum pump that has been stopped for a long time, it must be turned several times by hand to confirm that there is no jamming or other damage inside water circulation vacuum pump.
Starting procedure: (1) Open the exhaust pipe valve. (2) Start the motor (pay attention to the positive and negative rotation of the motor) (3) quickly open the water supply pipe. Gradually increase the water supply until it meets the specified requirements (be careful not to run the vacuum pump dry).
2. Stoping: The water circulation vacuum pump should be stopped in the following order: (1) (If there is a valve in the intake pipe) Close the valve on the intake pipe. (2) Close the water supply pipe and quickly shut down the vacuum pump. (3) After stopping, the water in the pump chamber should be drained to prevent the blades and pump shaft from breaking when starting again.
Instructions for ordering 2BV water circulation vacuum pump; Please provide the following detailed data:
1. Product name and model
2. The vacuum requirement (MPA)
3. Pumping speed requirement (L/S or M3/MIN)
4. Service and power conditions
5. Motor power (KW)
6. Speed (r/min)
7. Voltage [V]
8. Inlet and outlet diameters
9. Equipped with accessories or not
Manufacturer: ZIPO VALVE & PUMP CO., LTD
Contact Us
- ZIPO VALVE & PUMP CO., LTD.
- Contact nameIan.Z
- Phone86-180-81659672
- AddressHi-tech District, Bancang Industrial Zone Zigong,Sichuan
Valves | Pumps | Mechanical Seals |
- Corrosion Resistant Cartridge Mechanical Seal for Chemical Pump
- Cartridge mechanical seal for hot water pump or boiler circulating pump HPYY-S200-400
- large size double seal face cartridge mechanical seal with shaft diameter 200mm
- Stainless steel cartridge mechanical seal with single or double sealing surface
- split body spring type mechanical seal for double suction pump 200S65
- Spring type split bodymechanical seal for pipeline pump ISW150-400
- Spring loaded mechanical seal for water pump IS80-50-200
- ZCMS-65T TA2 corrosion-resistant and high-temperature resistant titanium material double sealing surface cartridge mechanical seal
- 316SS Spring type silicon carbide single sealing surface mechanical seal 58U-35
- 58U-50 spring type 304SS mechanical seal with single silicon carbide sealing surface
- 224UU-35 316L spring type mechanical seal with double silicon carbide sealing surfaces
- Tungsten carbide and graphite double sealing surface 316L spring type mechanical seal 224UU-35
- 321SS spring type mechanical seal 224UU-50 with tungsten carbide and graphite double sealing surfaces
- 224UU-65 silicon carbide double sealing surface 316L spring type mechanical seal
- H74D-35 316SS Spring type mechanical seal with tungsten carbide double sealing surface
- ZIPO ZQJ Deep Well Submersible Pump
- ZIPO ZISW/ ZISWH/ZISWR horizontal pipeline centrifugal pump
- ZIPO metal seated or soft seated butterfly valve
- Automatic coupling Installation base bracket with guide rail and lifting chain of submersible pump
- Double seal-face cartridge mechanical seals for chemical reaction kettles
- ZIPO industrial pump 3ZPNL vertical mud pump
- API 6A high pressure slab gate valve or wellhead valve
- API6D pipeline carbon steel slab gate valve
- ZIPO ZYX vertical immersion/submerged slurry pump or ZYJ stirring type submerged slurry pump
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Pumps & Parts > Pumps
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Ian.Z
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-