Contact Platform Support
Help CenterNew SF6 High-precision Gas Leak Detector DY-360
Related Products
-
Gas Densitometer Calibration Device DYJY-NUS$ 2655 - 2780MOQ: 1 Set -
Single Cup Insulating Oil Dielectric Strength Tester DYJY-AOT1US$ 908 - 978MOQ: 1 Set
-
Three Cup Insulating Oil Dielectric Strength Tester DYJY-IIIUS$ 1788 - 1928MOQ: 1 Set
-
Full Automatic Closed Flash Point Tester DYSD-602US$ 1327 - 1369MOQ: 1 Set
-
Open Flash Point Tester DYSD-702US$ 1327 - 1369MOQ: 1 Set
1、 Product characteristics
1. The internationally advanced pump suction, NDIR single beam dual wavelength infrared measurement technology is adopted, with high detection sensitivity, accuracy and stability;
2. High precision digital processing technology and unique drift control and temperature compensation circuit are adopted, with strong anti-interference capability;
3. It has full function self checking functions such as low battery, sensor failure and over range during detection;
4. Color large screen dot matrix LCD display and full Chinese menu function management are adopted;
5. The detection process displays the detection data in real time and has a dynamic waveform curve analysis chart;
6. The lower limit of the alarm can be set, and the screen displays the alarm set value, using the audible and visual alarm mode;
7. Automatic calculation of leakage amount and leakage rate of the tested equipment;
8. Self calibration function;
9. Large capacity rechargeable lithium battery, with continuous working time more than 5 hours;
10. Clock perpetual calendar function;
11. Small size, convenient for hand-held measurement;
12. It has 100 data and waveform storage functions, numbering and browsing query functions;
13. High brightness LED light source, which can be used for flashlight lighting;
2.2 Technical indicators
2、 Technical parameters
project |
content |
|||
1 |
Product model |
DY-360 SF6 Gas leak detector |
||
2 |
Measurement method |
NDIR Single beam dual wavelength infrared measurement technology |
||
3 |
Monitoring gas |
measuring range |
Resolution |
accuracy |
Sulfur hexafluoride gas |
0～2000ppm |
0.1ppm |
±（3%+5d） |
|
4 |
Repetitive performance |
＜2% |
||
5 |
Air pump extraction speed |
0.4L/min |
||
6 |
Duration |
Not less than 5 hours |
||
7 |
Instrument start-up warm-up time |
≤3minute |
||
8 |
Corresponding time |
Less than 30 seconds |
||
9 |
recovery time |
Less than 30 seconds |
||
10 |
Charging adapter specifications |
DC12V/2A |
||
11 |
Surge (impact) immunity |
±1.2kV |
||
12 |
ambient temperature |
-20℃～＋50℃ |
||
13 |
ambient humidity |
Relative humidity 5~95% (non condensing) |
||
14 |
atmospheric pressure |
50kPa～110kPa |
||
15 |
Degree of protection |
IP33, Double insulation, CAT II standard |
||
16 |
Overall dimensions |
200mm wide × 240 deep mm × 80mm high |
||
17 |
Main engine weight |
1KG |
||
Send Inquiry to This Supplier
You May Also Like
-
Micro Moisture Tester DYWS-IIUS$ 1118 - 1188MOQ: 1 Set
-
Full Automatic Dielectric Loss Measuring Instrument DYJS-8000US$ 2515 - 2585MOQ: 1 Set
-
Dielectric Loss and Resistivity Tester DYJS-6000US$ 2906 - 3048MOQ: 1 Set
-
SF6 Gas Recovery Instrument DYHS-205US$ 9500 - 9600MOQ: 1 Set
-
Density Relay Calibrator DYJY-NUS$ 2382 - 2664MOQ: 1 Set
-
Sf6 Intelligent Micro Water Measuring Instrument DYWS-VUS$ 2793 - 3075MOQ: 1 Set
-
SF6 Gas Qualitative Detector XP-1AUS$ 223 - 251MOQ: 1 Set
-
SF6 Gas Quantitative Leak Detector DY-350US$ 1746 - 1816MOQ: 1 Set
-
Power Cable Fault Tester DYDL-6CUS$ 4610 - 4890MOQ: 1 Set
-
Cable Identification Analyzer DYDL-15US$ 1956 - 2096MOQ: 1 Set
