Contact Platform Support
Help CenterASTM D3427 Lubricating Oil Air Release Characteristic Tester
Product Spotlights
Related Products
-
ASTM D6184 Conical Sieve Method Oil Separation From Lubricating Grease TesterUS$ 90 - 100MOQ: 1 Piece -
ASTM D942 Automatic Oxidation Stability of Lubricating Greases TesterUS$ 10000 - 11900MOQ: 1 Piece
-
ASTM D1263 Leakage Tendencies of Greases TesterUS$ 3200 - 3700MOQ: 1 Piece
-
ASTM D4693 Automobile Low Temperature Torque of Wheel Bearing Grease Tester ASTM D1478US$ 18800 - 19800MOQ: 1 Piece
-
Corrosion Tester of Lubricating Oil AnalyserUS$ 4200 - 4600MOQ: 1 Piece
Lubricating Oil Air Release Characteristic Tester
ASTM D3427
Product model: JF0308A
Introduction
This instrument is suitable for testing the ability of lubricating oil to separate mist air, such as gas turbine oil, hydraulic oil and other petroleum products. When using the instrument, the sample is heated to a certain temperature, and the sample is vigorously stirred by blowing excess compressed air into the sample, and the air forms small bubbles in the sample, that is, mist air. Record the time when the volume of mist air in the sample decreases to 0.2% after the gas is stopped.
Technical parameter
1. Applicable standards: ASTM D3427 IP313 DIN51585 NFT60151 SH/T0308
2. Electricity source: AC220±10% 50Hz±5%
3. Heating method: electric heating rod heating
4. Temperature control method: PID temperature controller
5. Temperature control range: normal temperature～80±1℃
6. Working pressure: 19.6Kpa
7. Pressure control: precise pressure regulating valve adjustment
8. Timing method: digital display timer
9. Pressure display: digital meter display
10. Machine power: 1500W
11. Instrument size: 340*400*560mm
12. Net weight: 25KG
Main feature
1. High-quality Omron PID thermostat, digital display temperature, accuracy 0.1℃
2. Digital display air pressure, with needle valve adjustment;
3. Automatically control the blowing time, and automatically record the defoaming time after blowing, with an accuracy of 0.01s;
4. The press-type liquid circulation joint can quickly and conveniently disassemble the test tube;
5. Safety protection device to prevent the liquid level from being too low;
6. Two sets of constant temperature tests can be carried out at the same time;
7. The sputtering multi-channel liquid circulator can well ensure the temperature uniformity of each point.
Send Inquiry to This Supplier
You May Also Like
-
FS 791 B335.2 Abrasiveness of Grease Gear TesterUS$ 13500 - 13600MOQ: 1 Piece
-
ASTM D3336 Automatic High Temperature Bearing Grease TesterUS$ 56800 - 56900MOQ: 1 Piece
-
ASTM D4289 ADDITION Grease and Synthetic Rubber Compatibility AnalyserUS$ 3500 - 3600MOQ: 1 Piece
-
Lubricating Grease Adhesion TesterUS$ 2100 - 2300MOQ: 1 Piece
-
ASTM D2603 Ultrasonic Shear Stability of Polymer-Containing Oils TesterUS$ 9500 - 10200MOQ: 1 Piece
-
ASTM D4310 Inhibited Mineral Oils Sludging and Corrosion Tendencies TesterUS$ 7200 - 7800MOQ: 1 Piece
-
Water Separability of Petroleum Oils TesterUS$ 7800 - 7900MOQ: 1 Piece
-
ASTM E659 Autoignition Temperature of Liquid Chemicals TesterUS$ 5280 - 5580MOQ: 1 Piece
-
ASTM D6743 Thermal Stability of Organic Heat Transfer Fluids TesterUS$ 6800 - 7300MOQ: 1 Piece
-
ASTM D1092 Lubricating Grease Apparent Viscosity TesterUS$ 26000 - 27300MOQ: 1 Piece
