Lubricant Vehicle Gear Oil Guttering Point Tester

Lubricant Vehicle Gear Oil Groove Point Tester SH/T0030

Model:JF0030

Introduction

This instrument is mainly suitable for testing the groove-forming properties of lubricants. When using the instrument, store the container containing the sample at the test temperature for 18 hours, then use a steel sheet to scrape a groove on the sample to observe whether the sample flows back and completely covers the bottom of the container within 10 seconds to judge the grooved characteristics of the sample.

Technical Parameters

1. Applicable standard: SH/T0030

2. Temperature control method: high-quality PID digital temperature controller

3. Temperature control accuracy: -60±0.2℃

4. Refrigeration method: imported dual compressor refrigeration

5. Timing method: digital display timer

6. Power of the whole machine: 1000W

7. Working power supply: AC220V50HZ

8. Instrument size: 500*480*290mm

9. Net weight: 48KG

Functional characteristics

1. The instrument adopts the double-compressor cascade refrigeration from Danfoss in Germany, which is environmentally friendly refrigerant and has a fast cooling speed.

2. Double-layer stainless steel cold bath, built-in medium, no need to add coolant, good heat preservation effect.

3. Integral structure, easy to move.

4. The instrument is made of cold-rolled steel plate, and the surface is electrostatically sprayed, which has the functions of corrosion resistance and easy cleaning.

5. The instrument welding adopts touch welding technology, no solder joints, beautiful appearance and generous appearance.