Contact Platform Support
Help Center300J 150J Pendulum Impact Testing Machine Manual Charpy Impact Tester
Related Products
-
ISO ASTM EN BIN GB JB-300 Manual Charpy Impact Test Procedure Impact Testing Machine SupplierNegotiableMOQ: 1 -
Electronic Power Impact Testing Machine,PVC Pipe Dart Drop Impact Test EquipmentUS$ 3000 - 8000MOQ: 1 Set
-
NDT Drop Impact Testing Machine , Drop Hammer Impact Test MachineNegotiableMOQ: 1
-
Free Fall Drop Test Machine /drop Hammer Impact Test MachineUS$ 2700 - 7800MOQ: 1 Set
-
Digital Display High Quality Metal Drop Weight Impact Testing MachineUS$ 216934.90 - 223932.80MOQ: 1 Set
300J 150J Pendulum Impact Testing Machine Manual Charpy Impact Tester
Impact Testing Machine are mainly used to determine the anti-impact capability of metal materials under dynamic load.
Carry out the functions of zero clearing and automatic return, capturing the value of lost impact energy and pendulum cycle by means of setting up with computer program,and the results can be monitored, stored and printed out. Control box or computer program control is alternative operating method.
Its a necessary testing machine,not only used in the metallurgy,machine manufacture etc areas, but also used for the science research.
Main Technical Specifications:
|
Model |
JB-300B |
JB-500B |
JB-800B |
||
|
impact energy |
150/300J |
250/500J |
500/800J |
||
|
The distance between the pendulum shaft and impact point |
750mm |
800mm |
800mm |
||
|
Impact speed |
5.2m/s |
5.4 m/s |
5.9m/s |
||
|
Pre-rising angle of the pendulum |
150° |
||||
|
Specimen bearer span |
40+0.2mm |
||||
|
Round angle of the jaw |
R1-1.5mm |
||||
|
Round angle of impact edge |
R2-2.5mm,R8±0.05mm |
||||
|
Angle accuracy |
0.1° |
||||
|
Standard specimen dimension |
10mm×10(7.5/5)mm×55mm |
||||
|
Power supply |
3phs, 380V, 50Hz Or 220V,60Hz |
||||
|
Dimensions (mm) |
2124 x 600 x 1340 |
2200 ×650 ×1960 |
2450 x 1200 x 2455
|
||
|
Net Weight (kg) |
450 |
650 |
2300 |
||
4. Features:
4.1 The principle machine of the testing machine has single supporting column structure, cantilever type pendulum hanging mode; the pendulum body is U-shaped
4.2 The impact cutter is installed and fixed by screws and is convenient and easy to be replaced;
4.3 Safety guard pin is arranged on the principle machine which is also provided with safety guard net
Send Inquiry to This Supplier
You May Also Like
-
ISO 812 ISO 974 Room Temperature to -70 Degrees Celsius Rubber Plastics Vulcanized Low Temperature Brittleness TesterNegotiableMOQ: 1
-
JBS-300B 300J 500J 800JSemi-automatic Charpy Izod Pendulum Digital Display Metal Impact Tester Impact Testing MachineUS$ 34289.71 - 36389.08MOQ: 1 Set
-
ASTM E23 ISO148 300/450/600/700J Low Temperature Impact Testing MachineNegotiableMOQ: 1
-
VU-2Y 2mm Impact Notch Broaching Machine, UV Notch Broaching MachineNegotiableMOQ: 1
-
XJ-50D 50J Digital Display Charpy & Izod & Tensile Plastic Impact Testing MachineNegotiableMOQ: 1
-
Charpy Testing Machine Charpy Impact Testing Jb300bUS$ 26592.02 - 34989.50MOQ: 1 Set
-
DCW Rubber and Plastic Low Temperature Brittleness Testing MachineNegotiableMOQ: 1
-
DWC-40 -40 Degree Compressor Refrigeration Impact Testing Low Temperature ChamberNegotiableMOQ: 1
-
JB-300 150 To 300J Manual Charpy Pendulum Impact Testing Machine Tester For SaleNegotiableMOQ: 1
-
JB-300B Charpy Impact Tester+metal Charpy Pendulum Impact Tester +Impact Testing InstrumentNegotiableMOQ: 1
