Contact Platform Support
Help CenterASTM D445 Low Temperature Petroleum Products Kinematic Viscosity Tester Viscosity Meter Viscometer
Product Spotlights
Related Products
-
ASTM D445 Automatic Kinematic ViscometerUS$ 6000 - 6100MOQ: 1 Piece -
ASTM D445 Automatic Kinematic Viscosity TesterUS$ 22000 - 23000MOQ: 1 Piece
-
ASTM D1266 Petroleum Products Sulfur Content Tester (Lamp Method)US$ 1100 - 1200MOQ: 1 Piece
-
ASTM D1322 Kerosene Smoke Point TesterUS$ 700 - 750MOQ: 1 Piece
-
Automatic Calorific Value for Petroleum Products Tester CalorimeterUS$ 22000 - 22900MOQ: 1 Piece
Low Temperature Petroleum Products Kinematic Viscosity Tester
Product Model: JF265D
Product Introduction
This instrument is suitable for measuring low temperature viscosity of petroleum products. The mechanism of the instrument: at a certain constant temperature, the time for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity is measured, and the product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the liquid measured at that temperature.
Technical Parameter
1. Applicable standards: ASTM D445 ISO3104 DIN51366 GB/T265
2. Temperature control method: high-quality PID digital temperature controller
3. Temperature control accuracy: normal temperature～-20±0.1℃/
normal temperature～-40±0.1℃
4. Heating method: electric heating tube heating
5. Refrigeration method: compressor refrigeration
6. Working unit: 2 tubes
7. Working power supply: AC220V/50Hz
8. Machine power: 2.5KW
9. Instrument size: 490*470*520mm
10. Net weight: 50KG
Features
1. The Dewar bottle is used as the bath body for transparent observation;
2. One-piece structure, easy to operate;
3. Vacuum Dewar bottle insulation, inner cylinder Φ150×300mm;
4. Two samples can be tested at the same time, which is convenient for parallel samples;
5. High-power solid-state relay control output, no voltage leakage;
6. There is a stirrer on the electronic heating bath;
7. Stainless steel heater;
8. The thermostat displays the heating status;
9. The shell is made of high-quality cold-rolled steel plate, and the surface is treated with electrostatic spray, which has good rust resistance and is easy to clean;
10. Safety facilities to prevent overheating and low water level;
11. It is very convenient to contact the control box.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D2699 Gasoline Octane Number Tester (Motor Method)US$ 153700 - 153800MOQ: 1 Piece
-
Automatic Gasoline Octane Number TesterUS$ 153700 - 153800MOQ: 1 Piece
-
Multi-Function Automatic Pour Point and Cold Filter Point of Petroleum Products TesterUS$ 6400 - 6500MOQ: 1 Piece
-
Mechanical Impurity for Petroleum Products TesterUS$ 1100 - 1200MOQ: 1 Piece
-
ASTM D5453 Full Automatic Total Sulfur Tester (Ultraviolet Fluorescence)US$ 30800 - 30900MOQ: 1 Piece
-
X-Fluorescence Sulfur Content AnalyzerUS$ 10000 - 10200MOQ: 1 Piece
-
Portable Particle CounterUS$ 16000 - 16600MOQ: 1 Piece
-
ISO3987 Lubricant Sulfated Ash TesterUS$ 2100 - 2200MOQ: 1 Piece
-
ASTM D97 Pour Point of Petroleum Products TesterUS$ 1900 - 2000MOQ: 1 Piece
-
ASTM D97 Two Slot Six Hole Pour Point and Cold Filter Filter Point TesterUS$ 4650 - 4750MOQ: 1 Piece
