Contact Platform Support
Help CenterModule Spare Parts 1C31205G01
Related Products
-
Module Spare Parts 1C31206G01US$ 1 - 100000MOQ: 1 Piece -
Module Spare Parts 1C31219G01US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 1C31222G01US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 1TGE120021R0010US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 200-510-017-017 200-510-111-013US$ 1 - 100000MOQ: 1 Piece
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
| 1C31205G01 |
• Verify the MVexp low alarm no longer sounds. • Verify the MVexp low alarm shows with a grey background in the alarm bar. • Verify the display unit alarm light no longer flashes. Breathing circuit occlusion alarm test 1. Set the vent mode to A/C VC. 2. Select Alarm Setup and set the Ppeak high alarm limit to the maximum setting. 3. Select START VENTILATION > Continue. 4. Disconnect the breathing circuit from the expiratory port. 5. Occlude the expiratory limb of the patient breathing circuit. • Verify the high priority Patient Circuit occluded alarm sounds. • Verify the Patient Circuit occluded alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. Breathing circuit alarm leak test 1. Set the vent mode to A/C VC. 2. Select START VENTILATION > Continue. 3. Use the quick key to set PEEP to Off. 4. Select Alarm Setup and set Leak Limit to 10%. 5. Create a small leak by partially disconnecting the expiratory limb hose from the ventilator. (Fully disconnecting the hose may cause the Patient Disconnect alarm.) • Verify the high priority Circuit Leak alarm sounds. • Verify the Circuit Leak alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. 6. Reconnect the expiratory limb hose to the ventilator. 7. Select Alarm Setup and set Leak Limit to 50%. • Verify the Circuit Leak alarm no longer sounds. • Verify the Circuit Leak alarm shows with a grey background in the alarm bar. • Verify the display unit alarm light no longer flashes.
Send Inquiry to This Supplier
You May Also Like
-
Module Spare Parts 200-566-000-012 200-566-101-012US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 200-595-002-011US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216AB61 HESG324013R0100 HESG435572P1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216DB61 HESG324063R0100 HESG216882AUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216EA61b HESG324015R1 KHESG324258R3I HESG448230R1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8115-DO-DCUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8121-DI-DCUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8502-BI-DPUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8521-TC-SAUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8937-HNUS$ 1 - 100000MOQ: 1 Piece
