Module Spare Parts 1C31219G01
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
| 1C31219G01 |
Depending on the charge status of the batteries being tested, it is possible that some alarms may be skipped. 1. Disconnect the power cord from the main power supply. 2. Set the ventilator mode to A/C VC. 3. Select START VENTILATION > Continue. 4. Allow ventilation to continue until the Low Internal Battery - 20 min alarm sounds. • Verify the medium priority Low Internal Battery - 20 min alarm sounds. • Verify the Low Internal Battery - 20 min alarm shows with a yellow background in the alarm bar. • Verify the display unit alarm light flashes yellow. 5. Allow ventilation to continue until the Low Internal Battery - 10 min sounds. • Verify the high priority Low Internal Battery - 10 min alarm sounds. • Verify the Low Internal Battery - 10 min alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. • Verify the Low Internal Battery - 20 min alarm no longer shows in the alarm bar. 6. Allow ventilation to continue until the Low Internal Battery - 5 min sounds. Note CARESCAPE™ R860 8-38 2065490-001 • Verify the high priority Low Internal Battery - 5 min alarm sounds. • Verify the Low Internal Battery - 5 min alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. • Verify the Low Internal Battery - 10 min alarm no longer shows in the alarm bar. 7. Allow the ventilation to continue until the Low Internal Battery - 1 min sounds. • Verify the high priority Low Internal Battery - 1 min alarm sounds • Verify the Low Internal Battery - 1 min alarm shows with a red background in the alarm bar. • Verify the display unit alarm light flashes red. • Verify the Low Internal Battery - 5 min alarm no longer shows in the alarm bar. After this test is completed, connect the ventilator to the main power supply for eight hours before it is used on a patient to make sure the batteries are fully charged. Power failure alarm test 1. With the system switch set to On, unplug the power cord from the AC mains power supply. • If the batteries are not fully charged, the System shutdown in less than x minutes alarm may occur instead of the Battery in use alarm. • Verify the medium priority Battery in use alarm sounds. • Verify the Battery in use alarm shows with a yellow background in the alarm bar. • Verify the display unit alarm light flashes yellow. • Verify the main power plug icon changes to a green battery in use indicator icon (located on the lower right corner of the display). 2. Connect the power cord to the electrical outlet
Send Inquiry to This Supplier
You May Also Like
-
Module Spare Parts 216AB61 HESG324013R0100 HESG435572P1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216DB61 HESG324063R0100 HESG216882AUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216EA61b HESG324015R1 KHESG324258R3I HESG448230R1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8115-DO-DCUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8121-DI-DCUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8502-BI-DPUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8521-TC-SAUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 8937-HNUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 97590-8 BD-PCI4PORTUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 9907-018US$ 1 - 100000MOQ: 1 Piece