PPD113B01-10-150000

Brand: ABB

Type: PPD113B01-10-150000

Origin: the Swiss

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

The extr/adm setpoint can be configured to either track the input, if admission or extr/adm, for bumpless transfer into control or remain at the last setting. When using the tracking option, the extr/adm setpoint cannot be changed until extr/adm control is enabled. The extr/adm setpoint can be changed by pressing the ADJUST UP or DOWN keys from the extr/adm setpoint screen (screen 1), closing a Extr/Adm Setpt Raise/Lower contact input, or selecting Extr/Adm Setpoint Raise or Lower commands from either Modbus communications link. In addition, the extr/adm setpoint can be directly set to a value by pressing the front panel ENTER key from the Extr/Adm Setpt screen or by Entering a new extr/adm Setpt through either Modbus communications link. The extr/adm setpoint can be directly set to a value by selecting the front panel ENTER key from the Extr/Adm Setpt screen or by Entering a new extr/adm Setpt through either Modbus communications link. 505E Digital Governor Manual 85018V1 174 Woodward MESSAGE 5 MEANING Extraction is Disabled Extraction control is disabled Extraction is Inhibited Extraction is inhibited and cannot be enabled Extraction is Enabled Extraction is enabled but not in control of actuator Extraction In Control Extraction is in control of actuator output Extr Active /Not In Ctrl Extraction is active but limited Extr Active w/Rmt Setpt Extraction is active but limited, Setpt is in remote ctrl Extr In Ctrl w/Rmt Setpt Extraction is in control, and Setpt is in remote ctrl Admission is Disabled Admission control is disabled Admission is Inhibited Admission is inhibited and cannot be enabled Admission is Enabled Admission is enabled but not in control of actuator Admission is In Control Admission is in control of actuator output Adm Active /Not In Ctrl Admission is active but limited Adm Active w/Rmt Setpt Admission is active but limited, Setpt is in remote ctrl Adm In Ctrl w/Rmt Setpt Admission is in control, and Setpt is in remote ctrl Extr/Adm is Disabled Extr/Adm control is disabled Extr/Adm is Inhibited Extr/Adm is inhibited and cannot be enabled Extr/Adm is Enabled Extr/Adm is enabled but not in control of actuator Extr/Adm In Control Extr/Adm is in control of actuator output Extr/Adm Active /Not In Ctrl Extr/Adm is active but limited Extr/Adm Active w/Rmt Setpt Extr/Adm is active but limited, Setpt is in remote ctrl Extr/Adm Ctrl w/Rmt Setpt Extr/Adm is in control, and Setpt is in remote ctrl Table 5-13. Extr/Adm Control Messages The following Extr/Adm control indications are available through the Modbus links: Extr/Adm is Enabled, Extr/Adm is Active, Extr/Adm is In Control, Extr/Adm is Inhibited, and the Extr/Adm Input Failed Alarm. In addition to these indications the Extr/Adm Setpoint, Extr/Adm Input, Extr/Adm Manual Demand, and Extr/Adm PID Output analog values are also available. The following shows the messages that will appear on screens 2 & 3 for message A and screens 5 & 6 for message B. MESSAGE A MEANING Ext Input Unit is configured for Extraction control. Ext/Adm Unit is configured for Extraction/Admission control. Admission Unit is configured for Admission control. MESSAGE B MEANING Ext Unit is configured for Extraction control. E/A Unit is configured for Extraction/Admission control. Adm Unit is configured for Admission control. Relay indications can be programmed to indicate Extr/Adm Control Active and Extr/Adm Control Enabled states.