DP820 3BSE013228R1 Digital Output Module of ABB S800 DCS System

DP820 3BSE013228R1 Digital output module of ABB S800 DCS system

DP820 3BSE013228R1 Digital output module of ABB S800 DCS system

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

The relay can be configured to store various data in a non-volatile memory, which

retains its data also in case of loss of auxiliary voltage (provided that the battery has

been inserted and is charged). Operation indication messages and LEDs, disturbance

recorder data, event codes and recorded data can all be configured to be stored in the

non-volatile memory whereas setting values and trip counters are always stored in

the EEPROM. The EEPROM does not require battery backup.

5.1.1.7. Self-supervision

The self-supervision system of the relay manages run-time fault situations and

informs the user about an existing fault. There are two types of fault indications;

internal relay fault (IRF) indications and warnings. Internal relay faults prevent relay

operation. Warnings are less severe faults and continued relay operation with full or

reduced functionality is allowed.

Internal relay fault (IRF)

When the self-supervision system detects a permanent internal relay fault, the green

indicator LED starts to flash. At the same time, the IRF contact (also referred to as

the IRF relay), which is normally picked up, drops off. The text INTERNAL FAULT

and a fault code appear on the display.