Contact Platform Support
Help CenterPDD205A0121 PDD205A1121 ABB Servo Amplifier Control Module
Related Products
-
PDD500A101 ABB 3BHE037649R0101 Drive Board Control Board Mainboard CardUS$ 190 - 200MOQ: 100 Pounds -
PETL101BE 2.0KN 3BSE004214R1 Tension Controller ABB Pillow Block SeriesUS$ 165 - 166MOQ: 100 Pounds
-
PFCL201C-10KN/20KN ABB Tension Amplifier (imported From Switzerland)US$ 113 - 166MOQ: 100 Pounds
-
PFCL201CD ABB 3BSE029774R5 Tension Measuring Unit The Weighing SensorUS$ 100 - 200MOQ: 100 Pounds
-
PFCL201CE-10KN/20KN/50KN ABB Tension Pillow Type Load CellUS$ 100 - 200MOQ: 100 Pounds
PDD205A0121 PDD205A1121 ABB Servo amplifier control module
PDD205A0121 PDD205A1121 ABB Servo amplifier control module
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
Indicator LEDs and operation indication messages
The operation of the relay can be monitored via the HMI by means of LED
indications and text messages on the LCD. On the front panel of the relay there are
three indicator LEDs with fixed functionality:
* Green indicator LED (ready)
* Yellow indicator LED (start/alarm)
* Red indicator LED (trip)
In addition, there are eight programmable LEDs and an indicator LED for front
communication. Refer to the Operator’s Manual for a more thorough presentation.
The indication messages on the LCD have a certain priority order. If different types
of indications are activated simultaneously, the message with the highest priority
appears on the LCD.
The relay provides three different kinds of demand values.
The first value shows the average voltage of all three phase-to-phase voltages
measured during one minute. The value is updated once a minute.
The second value shows the average voltage during an adjustable time range,
ranging from 0 to 999 minutes, with an accuracy of one minute. This value is
updated at the expiration of each time range.
The third value shows the highest one-minute average voltage value measured
during the previous time range. However, if the time range is set to zero, only the
one-minute and the maximum average voltage value is shown. The maximum value
is the highest one-minute mean value since the last reset.
The demand voltage values can be set to zero through serial communication using
SPA parameter V102. The average voltage values are also reset if SPA parameter
V105 is changed or the relay is reset.
Send Inquiry to This Supplier
You May Also Like
-
PFEA111-20 3BSE050090R20 ABB Spare Parts for Tension Controller AmplifierUS$ 100 - 200MOQ: 100 Pounds
-
PFEA111-65 3BSE050090R65 ABB The Tension Controller is Brand New and OriginalUS$ 10 - 90MOQ: 100 Pounds
-
PFEA112-20 3BSE050091R20 ABB Tension Sensor Amplifier (sold From Stock)US$ 190 - 260MOQ: 100 Pounds
-
PFEA112-65 3BSE050091R65 ABB Tension Control System Module (in Stock)US$ 190 - 260MOQ: 100 Pounds
-
PFEA113-20 3BSE028144R0020 ABB Tension Electronic ControllerUS$ 165 - 200MOQ: 100 Pounds
-
PFEA113-65 ABB 3BSE028144R0065 Module Control System PartsUS$ 165 - 166MOQ: 100 Pounds
-
PFRA101 3BSE003911R230 ABB New Original Tension ControllerUS$ 100 - 200MOQ: 100 Pounds
-
PFSA140 3BSE006503R1 Power Module: ABB Brand New Original, Imported From Europe and AmericaUS$ 100 - 200MOQ: 100 Pounds
-
PFSK130 3BSE002616R1 ABB Module Channel Control BoardUS$ 100 - 260MOQ: 100 Pounds
-
PFSK152 3BSE018877R1 ABB Module Card Motor in StockUS$ 100 - 260MOQ: 100 Pounds
