SY-60702001RA SY-61025006RA SY-61025004RA

Brand:FOXBORO

Type:SY-60702001RA SY-61025006RA SY-61025004RA SY-61025001RA SY-60399001R SY-60301001RB

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

The battery must be exchanged whenever: • The PM8xx B(attery) LED flashes or is extinguished. • Multiple or extended power cuts have occurred. • Extended periods of system downtime have occurred for maintenance or malfunctions. For reasons of safety, exchange the battery only when the AC 800M is powered up.

To exchange the internal battery: 1. Using a blade screwdriver, release the captive screw from the PM8xx and remove the right-hand cover. 2. Identify and remove the internal battery. 3. When power is re-established, ensure that the B(attery) LED is illuminated 4. Replace the PM8xx right-hand cover and tighten the screw. 5. Dispose of the run-down Lithium battery in an approved manner.

Insert a serviceable battery and check that battery polarity and orientation are correct, according to the marking on the housing.The external battery is mounted inside the SB821 External Battery unit. Since the battery is not rechargeable, it is important to exchange it on a regular basis (refer to the Maintenance Frequency Schedule for further details). For access to the battery and housing, remove the cover (see Figure 65 on page 196). When replacing the battery, be sure to check that polarity and orientation are correct. Specifications for the external battery: • Type: Low-rate lithium battery, 3.6 V, 16 Ah • Size: ANSI Size D / IEC R20 • Lithium contents: 5.6 g

Due to the batteries being connected in parallel, it is necessary, when using the SB821 external battery, to remove the internal battery from the processor unit in order to avoid reducing available memory back-up time.