ORIENTAL MOTOR 2GK180K

ORIENTAL MOTOR 2GK180K photo-1
US$ 1112 - 2022 MOQ: 1 Piece
Key Specifications
Get Latest Price
Brand Name:
2GK180K
Place of Origin:
China
Model Number:
2GK180K
Payment & Shipping
Payment Methods:
Port of Shipment:
China
Delivery Detail:
1 days
Brand Name 2GK180K
Place of Origin China
Model Number 2GK180K

Brand: ORIENTAL MOTOR

Type:2GK180K

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

The CI851 is powered from the processor unit via the CEX-Bus and requires therefore no additional external power source. Use the following procedure to install the CI851/TP851: 1. Mount the unit onto the DIN-rail, see Mounting AC 800M Units onto DIN-Rail on page 65 and Installing the PM86x/TP830 Processor Unit in Single Configuration on page 78. 2. Install a connector on the PROFIBUS DP cable. Connect the cable screen to the ground terminal within the connector to ground the screen via CI581. A connector with a switchable built-in bus termination is recommended. 3. Connect the PROFIBUS DP cable to the contact on the baseplate. 4. If this is at the end of the PROFIBUS DP cable, switch the bus termination ON. Otherwise leave the bus termination switched OFF. PROFIBUS DP Connection The PROFIBUS DP cable is connected via the 9-pin female D-type connector located on TP851.

CI852 is powered from the processor unit via the CEX-Bus and requires therefore no additional external power source. No field device on the FF H1 bus is powered from the CI852. An AC 800M Controller connected to a CI852 constitutes a FOUNDATION Fieldbus linking device. Use the following procedure to install the CI852/TP852: 1. Mount the unit onto the DIN-rail, see Mounting AC 800M Units onto DIN-Rail on page 65 and Installing the PM86x/TP830 Processor Unit in Single Configuration on page 78. 2. Install a connector on the FOUNDATION Fieldbus H1 cable. Connect the cable screen to the ground terminal within the connector to ground the screen via CI582. 3. Connect the FOUNDATION Fieldbus H1 cable to the contact on the baseplate. FOUNDATION Fieldbus H1 Connection Connect the FF H1 bus to the male DB9 connector located on the TP852 Baseplate.

Product Tags: DCS module , The PLC card a , The controller

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Verified Business License
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe, South Asia, Domestic Market

Recommended Categories

Explore top categories and find suppliers for your specific needs