ICellBox 2 ml 12 Chambers Cell Freezing Container With Five Consecutive Run Freezing Profile Curves

 iCellBox  2 ml 12 chambers cell freezing container with five consecutive run freezing profile curves

Key Features

1. The 12 chambers and sample tubes should be dry to avoid tube sticking upon freezing.

2. Make sure the core (metal ring) is at room temperature and seated in the bottom of the central cavity.

3. Place sample vials containing maxinum 2 ml of cell suspension in each well .The sample vials should not extend about the iCellbox body.

4. Check that the tubes slide in and out freely.

5. Fully seat the lid on the iCellbox.

6. Put the iCellbox upright into a -80℃ freezer or dry ice locker. Ensure that there is at least 1 inch of free space clearance around the iCellbox.

7. Freeze for 4 hours before transferring samples to archive storage.

Parameters

The iCellbox will freeze 12 tubes each containing maxinum 2 ml of cell suspension at -1℃ per minute when placed in a -80℃ environment (mechanicl freezer or dry ice locker). The five consecutive run freezing profile curves at right were performed wish 12 sample loads each.

                                                                                                                                                                                                                       Please send inquiry>>

                     If you need any detail packing information, please contact us>>

                                    If you have any question, please contact us>>