Contact Platform Support
Help CenterIEC 60502-1 600/1000V XLPE Insulated Armoured Cables
Related Products
-
NYCY PVC PVC 0.6/1kV Power CableNegotiableMOQ: 5000 Meters -
Low Voltage Cable 4x50mm Price Power Cable Xlpe Copper 3cx35sqmm PriceUS$ 1 - 50MOQ: 1000 Meters
-
Price of 4c x 25mm2 Copper Power Cable Armoured CableUS$ 1 - 50MOQ: 1000 Meters
-
IEC 60502-1 600/1000V, PVC Insulated Armoured CablesUS$ 1 - 1.1MOQ: 10000 Meters
-
IEC 60502-1 600/1000V PVC Insulated Unarmoured CablesNegotiableMOQ: 5000 Meters
These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.
Conductors
The conductors shall be either of Class 1 or Class 2 of plain or metal-coated annealed copper or of plain aluminium or aluminium alloy, or of Class 5 of plain or metal-coated copper in accordance with IEC 60228.
Assembly / Inner Covering
The inner coverings may be extruded or lapped. For cables with circular cores, except cables with more than five cores, a lapped inner covering shall be permitted only if the interstices between the cores are substantially filled. A suitable binder is permitted before application of an extruded inner covering. The material is compatible with the insulating material,The materials used for inner coverings and fillers shall be suitable for the operating temperature of the cable and compatible with the insulating material.For halogen free cables, the inner covering and fillers shall also be halogen free compound.
Armour
Aluminum/galvanized steel/steel wires applied helically over the Inner Covering as per IEC 60502-1, or double aluminum/steel tapes and copper/tinned copper wire can also be manufactured upon request.
Outer Sheath
Outer sheath shall be of extruded PVC Type ST1/ST2 as per IEC 60502-1, Polyethylene type ST3/ST7, Halogen free compound ST8, Polychloroprene, chlorosulfonated polyethylene or similar polymers, type SE1 are also available on request.
Fire Performance of Cable Sheaths
Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, Halogen Free material comply to IEC60754-1/2 and IEC 60684-2.
Send Inquiry to This Supplier
You May Also Like
-
12 24 36 48 96 144 2-288 Core All Dielectric Self Supporting (ADSS Cable) Fiber Optical CableUS$ 1 - 1.1MOQ: 1000 Meters
-
Duct Fiber Optic Cable GYTS GYFTY GYTA GYXTWUS$ 1 - 1.1MOQ: 1000 Meters
-
2~12cores Aerial Self-Supported ASU Fiber Optic CableUS$ 1 - 1.1MOQ: 1000 Meters
-
Armored Fiber Optic Cable GYTY53 GYFTA53 GYTA53 GYXTW GYXTW53US$ 1 - 1.1MOQ: 1000 Meters
-
1-12cores Outdoor FTTH Self-supporting Bow-type Drop CableUS$ 1 - 1.1MOQ: 5000 Meters
-
Secondary Aluminum URD CableUS$ 0.1 - 2MOQ: 10000 Meters
-
Primary UD Aluminum or Copper EPR / LLDPE, Concentric Neutral, 5 kV – 46 kVUS$ 0.1 - 2MOQ: 10000 Meters
-
Primary UD Aluminum or Copper TR-XLPE / LLDPE, Concentric Neutral, 5kV – 46 kVUS$ 0.1 - 2MOQ: 50000 Meters
-
Primary UD Aluminum or Copper TR-XLPE / PVC, Concentric Neutral, 5 kV – 46 kVUS$ 0.1 - 2MOQ: 50000 Meters
-
Primary UD Aluminum or Copper EPR / PVC, Concentric Neutral, 15 kV – 46 kVUS$ 0.1 - 2MOQ: 50000 Meters
