High Quality Car IP67 Oxygen Sensor
Introduction
High Quality Car IP67 Oxygen Sensor is used to measure the oxygen content in automobile exhaust, and convert the oxygen content into an electrical signal that is transmitted to the ECU, this allows the engine to achieve the target excess air factor (λ= 1) in a closed-loop; Ensure maximum conversion efficiency for hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOx) in the exhaust, and maximum conversion and purification of emission pollutants.
Features
1.Independent R&D and production of chips
2.Covering multiple series of car models
3.Meet the requirements of stable sensor signals, high accuracy and long service life under various atmosphere environments during vehicle driving
Specifications
| Resistance | 3.2±0.5Ω |
| Operating voltage | 6~8V |
| Measuring range of oxygen concentration | 0~21% |
| Measuring the range of air fuel ratio | 0~2 |
| Measuring error range of air - fuel ratio | ±0.01 |
| Ignition time | ≤10s |
| IP Code | IP67 |
| Lifetime | 5 Years/100000km |
Applications
Petrol Vehicle Emission Monitoring
Cubic automotive oxygen sensors use ceramic sensitive components to monitor automobile exhaust oxygen content in the electronic fuel injection system, and convert the oxygen content into an electrical signal that is transmitted to the ECU, which allows the engine to achieve the target of excess air factor (λ= 1) in a closed-loop; Ensure the maximum conversion efficiency for hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOx) in the exhaust, and maximum conversion and purification of emission pollutants.
Diesel Vehicle Emission Monitoring
Cubic nitrogen and oxygen sensor is used to detect the content of nitrogen oxides (NOx) in engine exhaust. It is a gas sensor made of solid electrolyte ceramics and nitrogen oxide sensitive electrode materials, using semiconductor technology to detect nitrogen oxides. The nano-composite structure on the surface of the electrode achieves extremely highselectivity of nitrogen oxide molecules. It can be used in the closed-loopcontrol of nitrogen oxides in the SCR system of diesel engines, or in theon-board diagnostics (OBD) of gasoline and diesel engines.
Motorcycle Emission Monitoring
The motorcycle oxygen sensor monitors whether the oxygen content in the engine exhaust is excessive in real time, and converts the detected concentration into a voltage signal, then transmits it to the engine ECU to ensure that the three-way catalytic converter has the maximum conversion efficiency for the three pollutants of hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOX) in exhaust gas, which can transform and purify the emission pollutants to the greatest extent, and realize the closed-loop control of the engine.
Send Inquiry to This Supplier
You May Also Like
-
5WK96616F NOX Sensor Nitrogen Oxide Sensor Fit for Mercedes Trucks A0091533628/005/61537328 24V Truck NOX SensorNegotiableMOQ: 1 Piece
-
5WK96612F NOX Sensor For SCAINA Trucks 2296799/1872080/2247379 Factory Supplier Truck Nitrogin Oxide SensorNegotiableMOQ: 1 Piece
-
5WK96693A NOX Sensor For Cummins Diesel Engnie 2872298/2894946RX 24V Nitrogen Oxide SensorNegotiableMOQ: 1 Piece
-
5WK96605C Truck NOX Sensor For Volvo 20873395 12V Nitrogen Oxide SensorNegotiableMOQ: 1 Piece
-
5WK96626B DAF Truck NOX Sensor 1836061 24V Nitrogen Oxide Sensor For Diesel EngineNegotiableMOQ: 1 Piece
-
5WK96615F Truck NOX Sensor For Iveco 5801754015 24V Nitrogen Oxide Sensor For Diesel EngineNegotiableMOQ: 1 Piece
-
5WK96747 Truck NOX Sensor For Renault 227908539R 12V Nitrogen Oxide Sensor Factory SupplierNegotiableMOQ: 1 Piece
-
5WK96618D/5WK96618C NOX Sensor For MAN Trucks Factory Supplier for Truck Nitrogin Oxide Sensor 51154080015NegotiableMOQ: 1 Piece
-
Cubic Lambda Wideband Sensor 5-Wire Oxygen O2 Sensor LSU4.9 High Quality Air Fuel Ratio SensorNegotiableMOQ: 1 Piece
-
High Performance 5 Wire Oxygen Sensor O2 Sensor for Vehicle Exhaust SystemNegotiableMOQ: 1 Piece