Home > Products > railway vehicles > FAR.25.853 Department of transportation, Federal Aviation administration regulations for compartment interiors
FAR.25.853 Department of transportation, Federal Aviation administration regulations for compartment interiors
- 200 Piece / Pieces per Month
- Fire Testing to Aircraft Material
- FMVSS 302 Flammability test to Motor Vehicle Interior materials
- GB 8410(Chinese Standard) Flammability Test to Motor Vehicle
- GB 8624 Fire Test to Building material and products
- NFPA 130 Standard for fixed guideway transit and passenger rail systems
- TB/T 3237 Chinese Fire test standard for railway vehicles
Product Details
Brand Name: | Casfire | Place of Origin: | China | Model Number: | 18906059211 |
Product Description
Aircraft decoration should use non-combustible or flame retardant materials, as little as possible combustible, flammable materials. On the basis of ensuring the comfortable and beautiful interior decoration of the aircraft, pay attention to meet certain fire protection requirements. According to relevant military and aviation standards, aircraft manufacturers strictly control and select raw materials and components.
FAR 25.853 Standard for Fire Testing of Aeronautical materials
FAA.FAR25.853 (CCAR 25.853 of China) has made requirements on cabin materials and seat cushions respectively, and detailed regulations are described in Appendix F. Including ⅰ, ⅱ, ⅲ, ⅳ and ⅴ parts:
ⅰ refers to the requirements, methods and judgment of material ignition performance test. This part is the main experimental part of FAR 25.853: horizontal combustion, vertical combustion, 45 degree Angle combustion, 60 degree Angle combustion.
ⅱ is about the combination test of aircraft seat cushion. It should be pointed out that the test of aircraft seat cushion not only requires raw materials to meet the requirements of ⅰ in Appendix F, but also needs to pass the combination test of ⅱ to be considered as passing the test.
ⅲ is a test method for flame penetration resistance of cargo compartment gaskets, including cargo compartment sidewall and ceiling gaskets.
ⅳ is an experiment to determine the heat release rate of cabin materials under thermal radiation. Requirements: The average value of total heat dissipation does not exceed 65 kw.min /M2, and the peak heat release rate does not exceed 65 Kw.m2.
ⅴ is the test method for determining the smoke emission characteristics of materials. The smoke production is quantified according to the optical density reading, and the average Ds is not more than 200.
FAR 25.853 Fire test standard for aviation materials - Reference Standard:
ABD0031 Airbus Test Method (AITM)
ABD0031 Airbus Standard (AITM)
AITM 2.0002 Vertical combustion test;
AITM 2.0003 Horizontal combustion test;
AITM 2.0004 45° combustion test;
AITM 2.0005 60° combustion test;
AITM 2.0006 Heat release test;
AITM 2.0007 Smoke density test;
AITM 2.0008 Cable smoke density test;
AITM 2.0009 Seat cushion test;
AITM 3.0005 Smoke toxicity test;
BSS7238 Flame retardant fire test - Determination of smoke density
Test method for toxic gases produced by BSS7239 materials during combustion
HB 5469 Civil aircraft cabin combustion test for non-metallic materials
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Tel: (+86) 0592-3500085
MP: (+86) 18906059211
Email: info@casfire.cn
Website:
From JJ2022
Contact Us
- CASfire Technical Co.,Ltd
railway vehicles | outgassing test | Aircraft Material | Motor Vehicle |
Electrical Products | Plastics Material | Building | CE certification |
Furniture | certification | Electrical |
- EPD III environmental protection product declaration certification
- HPD Health product claim certification
- LCA Rate Life cycle assessment certification
- EN 13162 Factory made mineral wool (MW) products—CE certification
- EN 13163Factory made expanded polystyrene(EPS)products—CE certification
- Airbus Standard: ABD 0031 Fire Test to Aircraft Material
- CE marking to carpet / CE marking to textile - Directive and Harmonized Standard
- CE marking to carpet / CE marking to textile
- CE marking to carpet / CE marking to textile - Directive and Harmonized Standard
- CE marking to carpet / CE marking to textile - Directive and Harmonized Standard
- ASTM E595-15 Aerospace Space Environment Simulation test chamber degassing test
- Flame retardant board BSS 7238 Boeing standard Yishuo aircraft material combustion smoke density test
- Flame retardant Testing of aircraft materials BSS7239: Toxicity testing
- Fire Test Service to Railway Vehicles
- EN 15102 Decorative Wallcoverings -- Roll and panel form products—CE certification
- BS 476-22 Fire Resistance Test to Building Material
- EN 13501-1: Fire Test to Building Material
- BS 5852 Fire test of upholstered seating
- EN ISO 4589-2:Oxygen Index Test to Plastics Material
- EN 45545-2:2020 Fire protection on railway vehicles
- EN 45545-2 Fire protection of railway vehicles - Part 2
- EN 15102 Decorative Wallcoverings -- Roll and panel form products
- CASfire Fire Test Service to Railway Vehicles
- BSS 7239 Toxicity Test to Aircraft material
Popular Searches
Find Similar Products By Category
- Business Services > Certification, Inspection & Credit Management > Product Certification
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-