Home > Products > non-magnetic steel > DG60 high hardness non-magnetic die steel HRC55-60 made in China
DG60 high hardness non-magnetic die steel HRC55-60 made in China
- 150000 Ton / Tons per Month
- Foshan
- T/T
- 7 days
- SUS630/17-4ph /0Cr17Ni4Cu4Nb Stainless steel round bar forged round bar
- Non Magnetic Steel Factory - China Non Magnetic Steel
- A2 Ductile wear resistant tool steel A2 die steel
- 7Mn15Cr2Al3V2WMo High Mo-V non-magnetic steel China non-magnetic steel
- N690 new super corrosion resistant high strength die steel
- sealing alloy 4J33 4J29 4J42 plate strips
Product Details
Brand Name: | Alloy steel without magnetic hardness | Place of Origin: | China | Model Number: | DG60 |
Length: | 1000 | Thickness: | 60 | Type: | Steel Plate |
Width: | 500 | Application: | Other | Surface Treatment: | Other |
Technique: | Hot Rolled | Standard: | Other, GB, JIS | Special Use: | Wear Resistant Steel |
Product Description
DG60 is a high hardness non-magnetic die steel, also known as non-magnetic hard alloy steel; DG60 factory hardness HRC55-60 degrees,
Non-magnetic carbide DG60 and non-magnetic steel (7MN15CrZA13WMOVZ, hereinafter referred to as 7MN15). Non-magnetic hard alloy has good wear resistance, long production cycle and high mold processing cost. It is suitable for long line products. 7MNLS non-magnetic steel has low wear resistance, short mold manufacturing cycle and low price, suitable for production of small output, short production cycle requirements of products. Dg60 non-magnetic steel is used in a narrow range, its heat treatment and as a die processing process is not widely understood.
DG60(1) direct quenching after carburizing has the advantages of high production efficiency, low cost, oxidation and decarburization, but because of the high carburizing temperature, the austenite grain grows up, the martensite after quenching is coarser, the residual austenite is also more, so the wear resistance and toughness are poor. Only suitable for essence fine grain steel and wear resistance requirements are not high or low bearing parts.
DG60(2) primary quenching is after slow cooling by carburizing and reheating to above the critical temperature for insulation and quenching. Compared with direct quenching, the microstructure of steel can be refined to a certain extent by primary quenching. The heating temperature of primary quenching is slightly higher than AC3 when the core tissue is required. For parts with small load but high surface wear resistance and high hardness performance requirements, the quenching temperature should be 30℃ ~ 50℃ above AC1 to refine the surface grain, while the core structure does not improve greatly, and the performance is slightly worse.
DG60(3) Secondary quenching for very high mechanical properties or for intrinsically coarse-grained steels, secondary quenching should be used. The purpose of secondary quenching is to improve the core structure, and the heating temperature is 30℃ ~ 50℃ above AC3. The purpose of the second quenching is to refine the microstructure of the surface layer and obtain fine martensite and uniformly distributed granular secondary cementite. The heating temperature is 30℃ ~ 50℃ above AC1. Dg60 is a high hardness non-magnetic die steel, also known as non-magnetic hard alloy steel; Dg60 factory hardness HRC58-62 degrees austenitic non-magnetic steel is divided into non-magnetic high manganese structural steel and non-magnetic stainless steel. Non-magnetic high manganese structural steel is mainly used in power, transportation, construction and other civil fields, non-magnetic stainless steel is mainly used in high-tech fields such as national defense and military industry. The development and research situation of fe-Mn, Fe-Mn-Cr and Fe-Mn-Al non-magnetic high manganese structural steels and non-magnetic stainless steels at home and abroad are analyzed. The development idea of reducing high manganese non-magnetic steel and high end non-magnetic stainless steel which can save ni, Mo, Cr and other metal resources in China is put forward, which not only meets the mechanical and non-magnetic properties of non-magnetic steel in civil field, but also meets the comprehensive performance requirements of good mechanics, welding and corrosion prevention of non-magnetic steel used in national defense and military industry.
DG60 non-magnetic steel is a small subclass of steel classification. Non-magnetic means it has very low permeability. This kind of steel can achieve better mechanical properties and good machinability through heat treatment, so it can be used as a non-magnetic cold working die steel for industrial production.
Contact Us
- Dongguan Oushang Metal Material Co., LTD
- Contact nameFeng- Lin
- Phone86-0769-82692577
- AddressNo. 26 liheng Road, Liheng Village, Qingxi Town Dongguan,Guangdong
non-magnetic steel | die steel | stainless steel |
- Iron Nickel Cobalt Alloy / Kovar Alloy / 4j29 /
- sealing alloy 4J33 4J29 4J42 plate strips
- Iron Nickel Cobalt Alloy / Kovar Alloy / 4j29 /
- N690 new super corrosion resistant high strength die steel
- A2 Ductile wear resistant tool steel A2 die steel
- Non Magnetic Steel Factory - China Non Magnetic Steel
- SUS630/17-4ph /0Cr17Ni4Cu4Nb Stainless steel round bar forged round bar
- DG60 high hardness non-magnetic die steel HRC55-60 made in China
- 7MN15CR2 has non-magnetic plastic die steel
- 1.2510 Material Oil Steel O1 Tool Steel Sks3 Df-3 9CrWMn GS510 Cold Work Tool Steel Forged Steel Bar
- S7 die steel
- N690 die steel
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Sheets
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Feng- Lin
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-