Contact Platform Support
Help CenterPD613 Die Steel Characteristics
Related Products
-
DF2F Pre-hardened SteelUS$ 5 - 8MOQ: 10 Kilograms -
5Cr21Mn9Ni4N Non-magnetic Die SteelUS$ 10 - 22MOQ: 10 Kilograms
-
17-4PH is Martensitic Precipitation-hardened Stainless SteelUS$ 5 - 25MOQ: 10 Kilograms
-
7Mn15Cr2Al13V2WMo Non-magnetic Die SteelUS$ 5 - 25MOQ: 10 Kilograms
-
7Mn15Cr2Al13V2WMo Non-magnetic Die SteelUS$ 5 - 25MOQ: 10 Kilograms
PD613 die steel features excellent wear resistance and durability up to a high mirror degree (around #10000), excellent flower etching processing. Heat treatment has small size change and excellent toughness. Chemical composition of PD613 die steel (SKD11 modified type) C carbon 0.03Si Silicon 0.10 Mn Mn 1.00S sulfur 0.03P phosphorus 0.030Cr chromium 0.35 Ni nickel 0.40 Cu copper 0.50~1.50 PD613 Die steel Application Datong plastic die steel PD613, It has excellent hardness, wear resistance and mirror-like properties, and good toughness and life. In addition, PD613, heat treatment is not easy to deformation, good processing.
Die steel for plastic moulds with wear resistance equivalent to SKD11. The hardness after heat treatment is approximately 56 to 61 HRC and has excellent wear resistance.
Compared with SKD11, the primary carbide distribution is better and the particle size is smaller, so the mirror and grain properties are improved.
Mechanical properties
Collection direction hardness HRC 0.2% yield stress N/mm2 (kgf/mm2) Tensile strength N/mm² (kgf/mm²) tension % aperture % impact value J/cm² (kgf · m/cm²)
Large 59 1815
(185) 2280
(233) 2.2 2.2 45
(4.6)
Tensile test sheet: equivalent to JIS No. 4
Impact test film: 10R notch
Impact test temperature: 293K (20℃)
Coefficient of thermal expansion
Coefficient of thermal expansion (x 10 ⁻ ⁶ / ℃)
30-100 ℃, 30-200 ℃, 30-300 ℃, 30-400 ℃, 30-500 ℃, 30-600 ℃, 30-700 ℃
10.8 11.7 11.2 11.5 11.8 12.1 13.1
Coefficient of thermal conductivity
Thermal conductivity W/(m·℃)(cal/cm·sec·℃)
20℃ 100℃ 200℃ 300℃ 500℃
28.5 (0.068), 27.6 (0.066), 26.4 (0.063), 25.5 (0.061), 23.4 (0.056)
Specific heat
Specific heat J/(kg·℃)
20 ℃
473
Characteristic of nitriding
Send Inquiry to This Supplier
You May Also Like
-
100Cr6 / GCr15/ 52100/ SUJ2/ Bearing Steel Round BarUS$ 5 - 8MOQ: 10 Kilograms
-
HPM75 Tool Steel Mould Steel Hpm75US$ 5 - 8MOQ: 10 Kilograms
-
High Quality H13 8407 8418 1.2343 1.2344 1.2885 M302 M360 Tool Die Mould Steel PlateUS$ 8 - 15MOQ: 10 Kilograms
-
7Mn15Cr2Al3V2WMo Non Magnetic Mold SteelUS$ 10 - 15MOQ: 10 Kilograms
-
7Mn15Cr2Al13V2WMo Non-magnetic Die SteelUS$ 5 - 25MOQ: 10 Kilograms
-
HPM75 Tool Steel Mould Steel Hpm75US$ 5 - 8MOQ: 10 Kilograms
-
HPM75 Non-Magnetic Mold Steel Round / Flat Bar – High Toughness, EDM CapableUS$ 15MOQ: 1 Kilogram
-
HPM75 Precision Non-Magnetic Mold Steel – EDM Suitable / Wear-ResistantUS$ 5 - 8MOQ: 10 Kilograms
-
DG60 Non-Magnetic Steel HRC55-60US$ 20 - 25MOQ: 10 Kilograms
-
Premium HPM75 High-Performance Mold Steel – Excellent Wear Resistance & MachinabilityUS$ 5 - 8MOQ: 10 Kilograms
