Contact Platform Support
Help CenterTitanium Carbide Welding Rods Carbide Inserts TiC Rod Wear Part for Crusher Hammer
Related Products
-
Tic Titanium Carbide Rod Carbide Rod For Jaw Plate Titanium Hammer WearnessUS$ 12.8 - 13.8MOQ: 1 Kilogram -
Titanium Carbide Rod Tic Rod for Stone Crushing Mining EquipmentsUS$ 12.8 - 13.8MOQ: 1 Kilogram
-
Titanium Carbide Roller High Speed Finishing Guide Wheel for Steel Rolling MillsUS$ 13.5 - 15MOQ: 1 Kilogram
-
Titanium Carbide Wire Guide Rollers TiC Guide Wheel Wire Reel RollersUS$ 13.5 - 15MOQ: 1 Kilogram
-
Titanium Carbide Welding Rods Carbide Inserts TiC Rod Wear Part for Crusher HammerUS$ 12.8 - 13.8MOQ: 1 Kilogram
The titanium carbide cermet rod(TiC rod) belongs to the steel-bonded cemented carbide, which is a kind of compound material based on the steel as the binder phase and used the refractory metal carbide(mainly the titanium carbide and the tungsten carbide) as the hard phase. The TiC rod is the high-hardness and high-strength titanium-based alloy composite material.
Product Physical and Mechanical Characteristics
| Grade | Density (g/cm3) |
Hardness(HRC) | TRS (Mpa) |
Porosity | Abrasion test | Machining | Elastic modulus (×102kg/cm2) |
Specific resistivity (Ωmm2/m) |
Coercive force(HC) | Impact toughness (J/cm2) | Thermal expansion Coefficient(×10-6/ºC) | ||||
| Annealing | Hardening | Annealing | Hardening | Annealing | Hardening | Temperature | a | ||||||||
| GT35 | 6.42~6.55 | ≤48 | ≥68 | ≥1400 | A04 B04 | - | √ | 306 | 298 | 0.812 | ≥3.5 | 68 | ≥3.5 | 20~200 20~700 |
8.43 11.83 |
| TM52 | 6.12~6.25 | sintered state: HRC≥60 |
≥1500 | A04 B04 | 7.2 | × | - | - | - | - | - | - | 20~200 20~700 |
9.16 11.13 |
|
Product Application
The TiC rod is mainly casted into the wear parts of crusher hammer, plate hammer, jaw plate, concave, mantle and crushing roller and so on so that the matrix of high manganese steel steel can be reduced effectively to increase the service life for hammer crushing equipment and saving the maintenance costs accordingly.
HOT SELLING Size: Φ8*60(L) Φ12*18(L); Φ12*30(L); Φ12*40(L); Φ12*50(L);
Φ14*50(L) Φ14*60(L) Φ14*80(L)
Φ16*60(L) Φ16*90(L) ;
Economic Cost Advantage (Common hammer with high manganese steel VS TiC hammer with TiC rod)
| Hammer Mode | Crusher Equipment Quantity (Set) |
Each Group of Hammer Weight(KG/Group) | Each Group Service Life (Day/Group) |
Yearly Usage Hammer Quantity (Group/ Year) |
Quantity (KG/Year) |
Wearing Part Material Cost (US$/KG) |
Total Cost (US$) |
Saving Cost(NOT included the replacement cost) (US$/Year) /Set |
||||
| PART A | PART B(6%-8% weight of hammer) | PART A | PART B | PART A | PART B | PART A | PART B | |||||
| Common Hammer (PART A & B is Manganese Steel) |
1 | 280 | 15 | 24 | 6720 | 1.5 | 10080 | |||||
| TiC Hammer (PART A is manganese steel, PART B is our TiC rod) | 1 | 260 | 20 | 73 | 5 | 1300 | 100 | 1.5 | 15 | 1950 | 1500 | 6630 |
| Note: If you have 3sets of crusher equipment to be operated, so the total saving cost is US$19890(US$6630*3). If the much heavier hammer, much cost will be saved. | ||||||||||||
About Us
HASTION Workshop
HASTION has passed the ISO9001:2008 international quality system authentication. we are well equipped with the high-level machines for production and inspection.until now HASTION has total over 600tons annual production capacity(TiC rod: 120-180tons; metal powder: 400-450tons), also our prodution scale is still increasing.
Send Inquiry to This Supplier
You May Also Like
-
Anticorrosion Fabrication of the Spray Layer (silicon Carbide Composite Material) of the Frp Absorption Tower in the Desulfurization SystemUS$ 1798.15 - 1828.92MOQ: 1 Unit
-
Overlay Repairing Welding Wire Chrome Carbide Wear Resistant Composite PlateNegotiableMOQ: 1 Square Meter
-
Tungsten Carbide Composite Rod Welding RodUS$ 30 - 50MOQ: 10 Kilograms
-
Carbide Composite Brazing Rods YD Welding RodsNegotiableMOQ: 1 Bag
-
Copper Welding Rod Copper Brazing RodNegotiableMOQ: 1
-
Tungsten Carbide Composite Rods Welding Composite Rods High Wear Resistance for AgriculturalNegotiableMOQ: 10 Kilograms
-
Good Quality Tungsten Carbide Welding Composite RodsUS$ 40.5 - 42.5MOQ: 10 Kilograms
-
Aluminum Rod Stock for Welding and FabricationUS$ 2800 - 2900MOQ: 10 Metric Tons
-
Nickel Bronze Composite Rods With Superior Wear Resistance for Mechanical PartsNegotiableMOQ: 1 Ton
-
220kV Long Rod Insulator for Transmission Lines With Composite CoreUS$ 50MOQ: 1 Piece
