Ed300 Electronic Paint Coating Thickness Gauge

Ed300 Electronic Paint Coating Thickness Gauge

Application:

Ed300 coating thickness gauge is a portable instrument which has stable performance, high accuracy, good repeatability and economical practicability. It applies eddy current principle according to the international ISO 2160 standard. It is used to test the thickness of the non-conductive coatings on non-ferrous metal substrates. It is applied to test the thickness of the anodic coating or coat of paint on aluminum profile, aluminum composite panel, aluminum work pieces and etc. It is widely used in the field of aluminum profile production, metal surface finishing, door, window and curtain wall, quality supervision and inspection of products and engineering. This instrument has gained good reputation and wide reliance from customers.

Coating thickness calibration plate is the measurement benchmark of the instrument. All the correction plates of this instrument have been tested by China national measure institute and attached with testing certificates.
The probe is the most damageable part of the thickness gauge.   The probe cable is another damageable part of the thickness gauge when the gauge is used frequently.
The operating environment of the thickness gauge is very poor in the aluminum extrusion factories. The probe will always be corroded by water or acidity oxidation bath. Normally it will be used for thousand time’s everyday shocks and falls happen very commonly, so it requests a strong durability of the
thickness gauge. Ed300 had stood the test of more than ten years in the poor operating environment.

Ed300 coating thickness gauge is applied to test the thickness  of the non-conductive coatings on non-ferrous metal substrates For example, it is applied to test the thickness of the anodic coating or coat of paint on aluminum profile, aluminum plate, aluminum tubing, aluminum composite panel, aluminum working pieces and etc. It is suitable to make quick nondestructive coating thickness inspection on-site for production, sale and engineering. It is used for production inspection, acceptation inspection and quality supervision and inspection.

Features:

Range:0~150μm

Accuracy: ±3%

Resolution: 0.1μm

Power Consumption: 0.06W

Dimension:150mm×80mm×30mm

Weight: 280g

Standard Package

 1 Gauge
1 Set of Coating Thickness Calibration Plates (4 pcs)
1 Calibration Substrates
1 Carrying Case

Optional Accessories

Calibration Plate (12μm25μm50μm100μattached with testing certificate)

Calibration Substrate (6063 aluminum allo)