AAAC ACSS AAC ACSR conductor Aluminium conductor bare overhead acsr drake conductor

1 . Weights are calculated using ASTM standard increments of stranding,
2 . Rated strengths are calculated by ASTM methods and converted to metric units after rounding,
3 . Resistance is calculated using ASTM standard increments of stranding, and metal conductivities of 61.2% IACS for
EC (1350) and 8", IACS for steel,
4 . Current ratings are based on 50 Hz AC, 75  0 C conductor temperature, and 0.61 m/s (2 ft/s) wind. 0.5 coefficients of
emissivity and absorption, Temperate rating –25
0 C ambient, 1000 watts/sq. meter sun. tropical rating - 40  0 C
ambient. 1200 watts/sq meter sun.  

Standard:

We can supply this conductor according to different recognized standards, acsr drake conductor such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109,

customer special specification also can be satisfied.

ACSR or  acsr drake conductor or ACSR conductor used for Overhead electrical distribution and transmission lines for distributing power.

(AAAC) Conductor as per ASTM-B-399-1992

(AAAC) Conductor as per BS-3242-1970

(AAAC) Conductor IS: 398-IV-1994

(ACSR) as per ASTM-B-233-1992

(AAC) as per BS-215-1-1970

(AAC) as per IS-398-1: 1976

(AAC) as per ASTM-B-231-1990

(ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992

(ACSR) BS-215-II-1970

(AACSR) as per IEC-1089-1191

AAC(All aluminum conductor) are suited for overhead power line.

Construction:

A conductor consisting aluminium and galvanized steelwires, built up in concentric layers. The centre wires are steel and outer layer aluminium wires.