Frequency Conversion Resonance Test Device
Variable Frequency Resonant Device
Brief introduction
BPXZ-DL series portable variable frequency resonance boosting device for cable makes the reactor and the tested capacitor in resonance by adjusting the power supply, to get from the tested equipment. Now it is a new method and trand for high voltage test and widely used both at home and abroad.
Product features
◆Because of the number of 35KV and blow voltage cable used, test workload is heavy, withstand test device with small volume and light weight is needed.
◆Portable cable withstand test system was born.
◆This system is required that the weight of the part for a single man remove is not more than 30kg and for two men is not more than 60kg. Suitable for site handling.
◆Use 220v or 380v single phase power supply, convenient to take power on site.
◆Reactor use the method of epoxy resin casti with nice appearance and reliability, can meet the requirements of all kinds of cable.
◆Withstand test of 110kv and blow voltage cable use oil immersed reactor, when the unit weight is over 100kg, can choose to equip with the special small electric crane of our company.
Product parameters
Rated Output Voltage | ≤0~220KV(AC effective value) |
Output Frequency | 30~300Hz |
Resonate Voltage Waveform | Sine wave, distortion≤1.0% |
Full load Working Time | Continuous working |
System Quality Factor | ≥20 under maximum load |
Frequency Adjustment | 0.1Hz |
Instability | ≤0.01% |
Power Supply | Single phase220V or three phase 380V±10%, power frequency50Hz±5% |
Configuration of cable(≤35KV)voltage withstand test
Mode | Control Cabinet | Reactor(dry type) | Excitation Transformer(dry type) | Divider | Application |
BPXZ-DL44/22 | 2.5kW | 2A/22kV one set | 2.5kVA/1kV | 25kV | 10kV cable≤1km |
BPXZ-DL88/22 | 4kW | 2A/22kV two sets | 4kVA/1kV | 25kV | 10kV cable≤2km |
BPXZ-DL132/22 | 6kW | 2A/22kV three sets | 6kVA/1/3kV | 60kV | 10kV cable≤3km 35kV cable≤1km |
BPXZ-DL176/22 | 7.5kW | 2A/22kV four sets | 7.5kVA/1/3kV | 60kV | 10kV cable≤4km 35kV cable≤1km |
BPXZ-DL264/22 | 10kW | 2A/22kV six sets | 10kVA/1/3kV | 60kV | 10kV cable≤6km 35kV cable≤2km |
BPXZ-DL330/22 | 15kW | 2.5A/22kV six sets | 15kVA/1/3kV | 100kV | 10kV cable≤8km 35kV cable≤2km |
BPXZ-DL640/32 | 25kW | 2.5A/32kV eight sets | 25kVA/1/3/5kV | 200kV | 10kV cable≤10km 35kV cable≤4km 110kV cable≤1km |
Configuration of cable(≥110KV)voltage withstand test
Mode | Control Cabinet | Reactor(oil immersed) | Excitation Transformer(oil immersed) | Divider | Application |
BPXZ-DL1300/130 | 50kW | 5A/130kV two sets | 50kVA/3/5/10kV | 150kV | 35kV cable≤2km 110kV cable≤2km |
BPXZ-DL2600/130 | 100kW | 5A/130kV four sets | 100kVA/3/5kV | 220kV | 35kV cable≤3km 110kV cable≤3km 220kV cable≤1.5km |
BPXZ-DL3200/220 | 160kW | 4A/220kV four sets | 160kVA/5/10kV | 160kV | 110kV cable≤5km 220kV cable≤3km |
BPXZ-DL6400/220 | 320kW | 8A/220kV four sets | 320kVA/5/10kV | 320kV | 110kV cable≤10km 220kV cable≤5km 500kV cable≤1km |
Note: can customize solution according to the tested product parameters | |||||
Send Inquiry to This Supplier
You May Also Like
-
Power Frequency DA/AC Test Transformer (inflatable)NegotiableMOQ: 1 Set
-
Manual/automatic Control Box For Test TransformerNegotiableMOQ: 1 Set
-
Automatic Isolation Boots(Gloves) Voltage Withstand Test DeviceNegotiableMOQ: 1 Set
-
Integrated Tansformer TesterNegotiableMOQ: 1 Set
-
Induction Withstand Voltage Test DeviceNegotiableMOQ: 1 Set
-
Transformer On-Load Tap Changer TesterNegotiableMOQ: 1 Set
-
Integrated Transformer Test BedNegotiableMOQ: 1 Set
-
Special Variable Ratio TesterNegotiableMOQ: 1 Set
-
Automatic Transformer Ratio Group TesterNegotiableMOQ: 1 Set
-
Closed Flash Point TesterNegotiableMOQ: 1 Set