Rolling Mill Bearings 381164 381168 381172 381176 381180 381184 381188 381192 380641X2 380664 380676 380688 382052X2
| model | d | D | B |
| 381164 | 320 | 540 | 406 |
| 381168 | 340 | 580 | 425 |
| 381172 | 360 | 600 | 420 |
| 381176 | 380 | 620 | 420 |
| 381180 | 400 | 650 | 456 |
| 381184 | 420 | 700 | 480 |
| 381188 | 440 | 720 | 480 |
| 381192 | 460 | 760 | 520 |
| 380641X2 | 205 | 320 | 205 |
| 380664 | 320 | 460 | 338 |
| 380676 | 380 | 550 | 350 |
| 380688 | 440 | 620 | 454 |
| 382052X2 | 260 | 400 | 255 |
Four row tapered roller bearing
Many low- or medium-speed rolling mill bearings use four-row tapered roller bearings. Due to its design, this bearing is capable of withstanding axial loads outside of radial loads. In general, no additional thrust bearings are required in the bearing arrangement, the roll journals can be relatively short, and the bearing housings on either side of the rolls can be of the same design. Due to the design of the four-row tapered roller bearing, this bearing must be mounted as a complete bearing on the chock. In order to be able to change rolls quickly, such bearings must be loosely fitted on the roll journal. The disadvantage of the loose fit is that the inner ring creeps on its base under the main load conditions, which usually causes wear of the base with a lower hardness than the bearing ring. In order to reduce the influence of loose fit to a certain extent, that is, to reduce wear, the bearing has a spiral groove in the inner ring hole, and/or an oil groove on the side of the inner ring. These oil grooves feed the lubricant to the contact surfaces of the inner ring and the base. In addition, the grease filled tank absorbs wear particles
Address: No. 24, Lane 397, Huhang Road, Fengxian District, Shanghai, China
Email:bearing@anshu-electromech.com Mobile phone:(0086)013918253057
Tel:(0086)021-60140720 wechate:ch13918253057
Fax:(0086)021-35090027 QQ:810480122
WhatsApp:+8613918253057 Skype:chpfchpf
Send Inquiry to This Supplier
You May Also Like
-
Rolling Mill Bearings FCD5684280 FC5880180 FC5882240 FCD5884300 FC6084218 FC6084240 FCD6084300 FCD6488300 FC6490240 FCD6492300 FCD6492340 FCD6496290 FCD6496350US$ 50 - 200MOQ: 1 Piece
-
Rolling Mill Bearings 382930 382952 382960 382960X2 382968 382972X2 381030X2 381036X2 381040X2 381050/YB2 381156 381160X2 381160US$ 50 - 200MOQ: 1 Piece
-
JDB500、JFB500、JDBB、JTW500、JDBS、JESW、JTWP、JUWP、JOLP、JOML、JTLP、JGLDW、JTGLW、JGLXS、JGLX、JSOL、JFRP、JESFUS$ 0.5 - 10MOQ: 1 Piece
-
SF-2 Standard Series 10 12 14 15 16 18 20 22 25 28 30 35 40 45 50 55 60 65 70 75 80 85 90 100 105 110US$ 0.5 - 10MOQ: 1 Piece
-
SF-2 Standard Series 120 125 130 140 150 160 170 180 190 200 220 240 250 260 280 300US$ 0.5 - 10MOQ: 1 Piece
-
Ordinary V BeltUS$ 0.5 - 100MOQ: 1 Set
-
WAM Silo Venting Filters SILOTOP® R03US$ 1047 - 1100MOQ: 1 Set
-
Centerline of Folder-like Soft Seal Butterfly ValveUS$ 1 - 1000MOQ: 1 Set
-
Soft-Seal Butterfly ValveUS$ 1 - 1000MOQ: 1 Set
-
Expansion Butterfly ValveUS$ 1 - 1000MOQ: 1 Set



