superior quality wifi MT7620A poe access point ap 300Mbps 2.4GHz Hotel Enterprise Mount In Wall Wireless Access Wifi AP Router

1, Connect it to the mains supply AC110~380V without any extra power adapters.

2, With a world top built-in antenna, it has super signals, wider coverage and stronger penetration.

3, With 5V 1500mA USB power output, it can provide fast charging for the vast majority of devices, like mobile phones and tablet PCs.

4, It supports LAN port output, optional for either wired or wireless networks.

5, It supports accessibility to 3G cards, compatible with major 3G cards.

6, Its USB port is available for plug-in of flash disks, mobile hard disks for data sharing.

7, The hardware design of a WPS/WIFI switch facilitates password protection and on-off of WIFI signals.

8, Its convenient relay function can extend the WIFI distance significantly and save a lot of network cables.

• Wall type WIFI router with the country's first telephone interface

• The 11N 150M Wireless AP, transfer faster and more stable

• Exempt hotel walls trouble playing online module

• Wired and wireless integration

• The most complete wireless encryption technology, with WEP, WPA-PSK, WPA2-PSK, WPA, WPA2, MAC address authentication, and other encryption / security settings to make wireless networks more secure

• Support relay function, let your WIFI broader range of distances.

1. Remove the cover(Use a screwdriver to remove the cover from the panel surface)

2. Connecting wire(The 220V wires, cables, telephone lines connected to the specified interface on the rear panel to ensure a firm connection,Connect the power off before connecting wires to connect 220V,Avoid electric shock).

3. Mounting screws(Remove the screws from the box, put the socket into the bottom box fixed rear panel, the panel surface cover to cover, the surface.In the bottom box to adjust the screws tighten the screw ratio.)

4. Install the cover(Cover snaps into the slot above the panel).