Home > Products > Industry Special instruments > HY-106C Working vibration meter Multi-function data acquisition instrument
HY-106C Working vibration meter Multi-function data acquisition instrument
- 1 Set / Sets per Month
- Shezhen
- T/T Credit Card
Product Details
Brand Name: | HYJEYQ | Place of Origin: | Shaanxi, China | Model Number: | HY-106C(S) |
Power: | Electronic |
Product Description
Introduction
A multi-function data acquisition instrument that combines vibration, speed and temperature measurement; it can measure the acceleration, velocity and displacement of vibration signals, and has a wide range of measurement bandwidths; with automatic range function, users can easily obtain the best test resolution; The vibrometer itself has time domain and spectrum display, and has a variety of sampling points or frequency resolution; there are multiple triggering methods for simultaneous measurement in vibration measurement; when measuring vibration, the source of the collected signal is very flexible; measurement process There are dynamic waveforms in the middle. Specially developed single-sided dynamic balance correction independent of other working methods, full-featured and easy to use, which satisfies the requirements of on-site balancing. At the same time, according to the working environment requirements, the explosion-proof type of this model can be selected.
Technical Parameters
1. Display : 240×160 graphic dot matrix liquid crystal display with backlight
2. Power source : DC 7.2 V (rechargeable lithium battery pack)
3. Power consumption: Static about 0.5W, dynamic maximum 1.2W
4. Memory: The total RAM capacity is 8Mbytes. Generally, it can store about 1000 waveform measurement points. When using high-line sampling, the number of stored measurement points is reduced proportionally.
5. Special function display: Waveform type measuring point provides time domain waveform and spectrum map display; Dynamic balance test has corresponding vibration and weight diagram display; If the battery is low, it will automatically remind the user to charge in time with text message.
6. Auto power off: In the non-measurement state, 5 minutes after the stop button operation, it will automatically shut down. In any state, the battery voltage is automatically turned off when it drops below 6V. In the latter case, you may not be able to reboot if you do not charge.
7. Alarm: The button is invalid, the operation is improper, the measured value is greater than the alarm value or overflow, etc., and there are sound, text or graphic information prompts.
8. Dimensions: 240 mm × 116 mm × 100 mm.
9. Normal working conditions: Ambient temperature: 0 °C ~ 40 °C; Relative humidity: ≤ 80%; no dust, corrosive gas and strong electromagnetic field interference.
Vibration measurement index 1. Frequency range: 10Hz ~ 100Hz, 10Hz ~ 1000Hz, 10Hz ~ 5000Hz; Note: Measurement of acceleration, speed, displacement and voltage signals can be tested in the above three frequency bands. 2. Frequency resolution: 10Hz ~ 100Hz: 1 / 0.5 / 0.25 / 0.125 / 0.0625 / 0.03125, corresponding number of lines: 100 / 200 / 400 / 800 / 1600 / 3200; 10Hz ~ 1000Hz: 5 / 2.5 / 1.25 / 0.625 / 0.3125 / 0.15625, corresponding line number: 200 / 400 / 800 / 1600 / 3200 / 6400; 10Hz ~ 5000Hz: 6.25 / 3.125 / 1.5625 / 0.78125, corresponding line number: 400 / 800 / 1600 / 3200 / 6400. Note: Measurement of acceleration, velocity, displacement and voltage signals can be tested by selecting any one of the above three frequency bands. 3. Range: Acceleration (peak): 10 times the range (large range) 0m/s2 ~ 2000m/s2 (non-original sensor), 1x range (conventional range) 0.0m/s2 ~ 200.0m/s2, 0.1 times the range ( Small range) 0.00m/s2 ~ 20.00m/s2; Speed (effective value): 10 times the range (large range) 0mm / s ~ 1400mm / s (non-original sensor), 1 times the range (conventional range) 0.0mm / s ~ 140.0mm / s, 0.1 times the range (small range) 0.00mm/s ~ 14.00mm/s; Position shift (peak-to-peak): 10 times scale (large range) 0.00mm ~ 40.00mm (non-original sensor), 1x range (conventional range) 0μm ~ 4000μm, 0.1 times scale (small range) 0.0μm ~ 400.0μm. 4. Indication error: ± (5% reading + 1 word), acceleration, velocity, displacement and voltage signal resolution are: 0.1m / s2, 0.1mm / s, 1μm and 1mV. 5. Vibration sensor: Piezoelectric accelerometer with built-in charge amplifier (ICP), sensitivity: 50 mV/g (nominal value), working voltage: 24V, frequency range: 0.5Hz ~ 5kHz.
Temperature measurement index 1. Temperature sensor: Non-contact infrared thermopile. 2.D:S : 4:1 (ratio of the distance between the measured object and the diameter of the measured surface). 3. Emissivity: 0.95. 4. Range: -15 ° C ~ 150 ° C. 5. Error: ±2 °C or ±2% reading (take larger value). 6. Separate rate: 1 °C.
Speed measurement index 1. Speed sensor: Built-in speed sensor, non-contact laser-photoelectric type. 2. Range: 60 rpm ~ 30000 rpm. 3. Error: ± (0.02% reading + 1 turn). 4. Separate rate: 1 turn.
One-sided dynamic balance correction 1. Vibration signal: The vibration signal can only be collected using the local sensor (using an external sensor can only be qualitative and not quantitative). 2. Rotating signal: Various modes are available: laser-photoelectric device in the machine, optional laser tachometer HY-441LP or other user-supplied rotation signals (the latter two are input by “external trigger input socket”). Note: During the whole test process, the pick-up points of the vibration signal and the rotation signal should remain unchanged, and there should be no movement, otherwise the accuracy of the test will be affected. 3. Dynamic balance speed range: 600 rpm ~ 12000 rpm. 4. Dynamic balance phase angle error: ±1° (electric signal simulation). 5. Separate rate: 1°. |
Way of working
1. Vibration signal acquisition and analysis system working mode: Compose a vibration signal acquisition and analysis system with the supporting PC software to manage and implement equipment condition monitoring. The software that is compatible with this machine is based on the Windows operating system. It integrates analysis and communication into one, based on an efficient and reliable database, with advanced management functions, which can easily generate inspection plans and monitor equipment status for enterprises. Work provides effective support. The software has a variety of practical analysis functions that provide a scientific basis for equipment troubleshooting and maintenance planning.
2. Independent working mode: As a measuring instrument for independent work, it can measure vibration, temperature, speed and dynamic balance for equipment inspection under unplanned management.
Contact Us
- Lixian Instrument Scientific Co., Ltd.
- KD-2260 Manual Rotary Microtome high-precision sectioning microtome
- KD-2508 microtome paraffin section cutting tissue sectioning microtome paraffin slicer
- KD-1508A Tissue microtome Laboratory Rotary microtome
- KD-2950 low-temperature constant cooling freezing and paraffin microtome
- KD-2508-VI Rotary Microtome For Tissue Sectioning dual-use Microtome
- KD-3398-VI Automatic Rotary Microtome fast freezing microtome
- HSY-265B petroleum oil product kinematic viscosity tester
- HSY-265C petroleum product kinematic viscosity tester
- HSY-0983 drug cone penetration testing
- ZQ-50S automatic precision cutting machine
- ZQ-300F automatic metallographic cutting machine
- ZY-200 automatic rail cutting machine
- GT-2 Gloves Leak Detector (Offline)
- GT-05 Gloves Leak Detector (Online)
- GT-06 Gloves Leak Detector (Online)
- HSY-2801E1 asphalt penetration test equipment
- JJZY Industry specific clean transfer equipment
- NBD-B1700-12IT loaded zirconia crystallizer
- NBD-O1200-50ITY-80 vacuum atmosphere automatic feeding and unloading rotary tube furnace
- BD-O1200-IIT-150F double temperature zone tube furnace 1200 degrees
- NBD-CMT1200-IT CMT furnace slide rail tube furnace
- NBD-T1500-60IIT intelligent double temperature zone tube furnace 1500 degrees
- SCIENTZ-18N multi-manifold common type freeze dryer
- SCIENTZ-18NA multi-manifold gland type freeze dryer
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-