Contact Platform Support
Help CenterDry Mobile Sand Blaster，Can Spray Stone and Large Pipe Inner Wall
Related Products
-
Travelling Sandblasting Machine，Dry Spray and Wet Spray ConversionCNY 8000 - 20000MOQ: 1 Set -
Small Manual Sandblasting Machine，Increase Adhesion and DerustingCNY 4500 - 5800MOQ: 1 Set
-
Manual Sandblasting Machine，Pretreatment Equipment for Deburring and ElectroplatingCNY 4800 - 5500MOQ: 1 Set
-
Wet Manual Sandblasting MachineCNY 12000 - 15000MOQ: 1 Set
-
High Pressure Manual Sand Blasting MachineCNY 10000 - 15000MOQ: 1 Set
Product Description:
Fuselage height: 1200mm
Diameter: 400mm
Volume: 0.1m3
Working pressure: 7bar (kg/cm 2)
Sandblasting launcher: 1
Compressed air flow: 1.5m 3 /min
Product Description:
1. The abrasive valve, pneumatic abrasive control valve, sandblasting air valve and pneumatic remote control switch, which are developed and developed by American technology, constitute an advanced and reliable press-in sandblasting system.
2. Abrasive valve and abrasive control valve can control the flow of abrasive more accurately. They can adjust the flow of sand at will and open or close quickly at will. This not only saves abrasive, but also achieves extremely high efficiency and reliability of sandblasting.
3. through the gas control switch installed , at the same time, remote control abrasive valve and sandblast valve can be operated freely. The machine body is durable, stable and flexible, easy to operate, safe and reliable, highly efficient sand blasting, strong impact force, deep hit point, a wide range of controllable, widely used in hydraulic, ship, gate, oil, thermal spraying, agricultural machinery, drilling platforms, steel structures, bridges, large dies, field anti-corrosion. Stone, glass, FRP processing and other industries.
The 4. fittings are reliable and durable.
Product factory standard configuration:
A whole machine
Sand pipe 10 meters
A Sandblasting launcher
Sandblasting protective suit
The advantages of sandblasting machine are:
1. the metal parts of the sandblaster are basically free from damage and the dimensional accuracy will not change.
2. the surface of the parts is not contaminated, and the abrasive will not react with the parts.
3. Sandblasting machine can easily handle grooves, grooves and other difficult to contact parts, a variety of granularity of abrasive can choose to use;
4. The cost of treatment is greatly reduced, mainly reflected in the improvement of the efficiency of the sandblasting machine, which can meet various surface finishing requirements.
5. low energy consumption and low cost.
6. sandblasting machine does not pollute the environment, and saves the cost of environmental treatment.
email：1602005722@qq.com
Send Inquiry to This Supplier
You May Also Like
-
Box Type Manual Sandblasting Machine，The Oxide Layer Can be RemovedCNY 8000 - 15000MOQ: 1 Set
-
Wet Sandblasting Machine, Environmental Protection Without DustCNY 15000 - 18000MOQ: 1 Barrel
-
High Pressure Manual Sand Blasting Machine，Suitable for Hard Die Casting and Metal Surface Treatment.CNY 8800 - 12000MOQ: 1 Set
-
Double Station Manual Sandblasting Machine，Surface Treatment EquipmentCNY 15000 - 22000MOQ: 1 Set
-
Automatic Sand Blasting Machine for Glass and StoneCNY 15000 - 60000MOQ: 1 Set
-
Small and Medium-sized Automatic Shot Blasting MachineCNY 30000 - 50000MOQ: 1 Set
-
Hook Shot Blasting Machine，Single Hook or Double Hook Can be Selected.CNY 40000 - 150000MOQ: 1 Set
-
Wind Recovery Sand Blasting Room，Surface Treatment for Large WorkpieceCNY 100000 - 400000MOQ: 1 Set
-
Honeycomb Sandblasting Room，Surface Treatment EquipmentCNY 100000 - 400000MOQ: 1 Set
-
Drum Type Burr Removing MachineCNY 8800 - 18000MOQ: 1 Set
