Contact Platform Support
Help CenterHigh Pressure Manual Sand Blasting Machine，Suitable for Hard Die Casting and Metal Surface Treatment.
Related Products
-
Double Station Manual Sandblasting Machine，Surface Treatment EquipmentCNY 15000 - 22000MOQ: 1 Set -
Dry Mobile Sand Blaster，Can Spray Stone and Large Pipe Inner WallCNY 5800 - 6800MOQ: 1 Set
-
Travelling Sandblasting Machine，Dry Spray and Wet Spray ConversionCNY 8000 - 20000MOQ: 1 Set
-
Small Manual Sandblasting Machine，Increase Adhesion and DerustingCNY 4500 - 5800MOQ: 1 Set
-
Manual Sandblasting Machine，Pretreatment Equipment for Deburring and ElectroplatingCNY 4800 - 5500MOQ: 1 Set
Machine dimension: 1000X1500X1700
Working chamber size: 1000X1000X830
Separator motor: 220V/50HZ/550W
Machine lighting: 220V 13W energy saving lamp
Separator air volume: 8.5m3/min
Dedusting way: bag type dedusting box, using pneumatic automatic / manual dedusting.
Air source requirements: pressure 7BAR (kg/ square meters) flow rate of 2 cubic meters /min
Scope of application:
Pretreatment before electroplating and spraying to improve adhesion; all kinds of molds, castings, stamping parts, metal surface of the oxide scale, debris removal, rust removal, oil removal, old renovation; ceramic, glass, plastic products gloss, atomization, deburring, deburring, enhance the adhesion of spraying.
Product characteristics:
It is a pressurized sandblasting machine with strong impact force and better cleaning ability than ordinary pressure sandblasting machine. It is suitable for surface cleaning of workpiece with thicker and harder coating. The design of the machine is scientific and reasonable, the machine is compact, the performance is superior, with fine sand cyclone equipment covers a small area, safe and environmental protection, automatic sand return, cyclone separator can separate the dust and sand, limit the loss of abrasive. It can be equipped with automatic drying device to avoid the trouble of blocking sand pipes and affecting sandblasting effect caused by damp fine sand abrasive. * Handcart (with movable turntable attached) * Open the front door or side door for selection * Strengthened fixed turntable * can be made according to the size of customer requirements
The advantages of sandblasting machine are:
1. the metal parts of the sandblaster are basically free from damage and the dimensional accuracy will not change.
2. the surface of the parts is not contaminated, and the abrasive will not react with the parts.
3. Sandblasting machine can easily handle grooves, grooves and other difficult to contact parts, a variety of granularity of abrasive can choose to use;
4. The cost of treatment is greatly reduced, mainly reflected in the improvement of the efficiency of the sandblasting machine, which can meet various surface finishing requirements.
5. low energy consumption and low cost.
6. sandblasting machine does not pollute the environment, and saves the cost of environmental treatment.
email：1602005722@qq.com
Send Inquiry to This Supplier
You May Also Like
-
Wet Manual Sandblasting MachineCNY 12000 - 15000MOQ: 1 Set
-
High Pressure Manual Sand Blasting MachineCNY 10000 - 15000MOQ: 1 Set
-
Box Type Manual Sandblasting Machine，The Oxide Layer Can be RemovedCNY 8000 - 15000MOQ: 1 Set
-
Wet Sandblasting Machine, Environmental Protection Without DustCNY 15000 - 18000MOQ: 1 Barrel
-
Automatic Sand Blasting Machine for Glass and StoneCNY 15000 - 60000MOQ: 1 Set
-
Small and Medium-sized Automatic Shot Blasting MachineCNY 30000 - 50000MOQ: 1 Set
-
Hook Shot Blasting Machine，Single Hook or Double Hook Can be Selected.CNY 40000 - 150000MOQ: 1 Set
-
Wind Recovery Sand Blasting Room，Surface Treatment for Large WorkpieceCNY 100000 - 400000MOQ: 1 Set
-
Honeycomb Sandblasting Room，Surface Treatment EquipmentCNY 100000 - 400000MOQ: 1 Set
-
Drum Type Burr Removing MachineCNY 8800 - 18000MOQ: 1 Set
