230*72*43 Adjustable Link Harvester Rubber Track , Rubber Tracks For Combine Harvesters
| Width: | 230mm | Pitch: | 72mm |
|---|---|---|---|
| Link: | 43 | Material: | Rubber And Steel |
| Overall Length: | 3096mm | Weight: | 46.87kg |
80B.4 rubber track 230w* 72p* 42l for mini-Excavator/Harvester/crawler loader/
Commodity: Excavator Track(230*72*43)
Size:Width230*Pitch72*Links43
Weight:46.87kg
Link and lenght can be adjustable
Warranty:Guarantee one year under normal use
1.Appliciation:
mainly used in excavator and other model number can be used
in snowblower,snowmobile,robot,wheelchair,(mini) excavators,track loaders,pitch
paver,agricultural,harvest,dumpers...etc.
2. Characteristics of rubber track:
1). Less damage to the ground surface
2). Low noise
3). High running speed
4). Less vibration;
5). Low ground contack specific pressure
6). High tractive force
7). Light weight
8). Easy to change
3. Parameters:
| size width*pitchlinkABCDFpatternguiding130*7229-402364.5282815AF1A2150*6032-40226422.524.515ACA2150*7229-402364232315ACA2170*6030-401957222213CEA1180*6030-4023.5642121.515AMA1180*7231-432568292915BKA2180*72K32-4820612219.517BB1B2B180*7231-432366302915BB1B2H180*7230-502364272617BKA2190*6030-4023.5642121.514AMA1190*7231-41216827.526.515BFA2200*7234-47237628.526.518BB1A2200*72K37-47216929.52918BMA2 |
4. Rubber Track Characteristic
1.Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks
2.A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks
3.Rubber tracks permit machines to travel at a higher speed than steel tracks
4.Rubber tracks insulated machine and operator from vibraion, exteding the service life of machine and decreasing operator's fatigue
5. The notices of using rubber tracks
1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases.(Be careful because the rubber crawler may come off if the tension is too low).
2. Avoid projection from the frame around the rubber crawler, especially on its inner circumference.(Rubber crawlers are easily deformed; if it comes into contact with the frame, an accident such the rubber being cut can occur).
3. Avoid sharp projections when traveling.
4.Avoid turning too fast on concrete roads with a high coefficient of frction because this can cause accidents such as cutting the rubber.
6. Rubber Track Packing and QC
7. About us:
We supply Rubber Tracks,Rubber Tracks for Truck,Small Rubber Track,Mini Asphalt Paver
Rubber Track,Rubber Track for Harvesting Excvavtor,Rubber Track for Skid Steer
Loader,Rubber Track for snowmobile,Rubber Track for snowblower,Rubber track for robot,etc.
Send Inquiry to This Supplier
You May Also Like
-
Bobcat MT85 Rubber Track - Single 180x72x45 With High Traction and Performance 1 Year WarrantyUS$ 50 - 500MOQ: 1 Piece
-
Small Bobcat Replacement Tracks Low Ground Pressure 3168mm Overall LengthUS$ 50 - 500MOQ: 1 Piece
-
Rubber Tracks / Rubber Crawler 230 x 96 x 36 for Caterpillar 301.7D / Neuson ET18US$ 50 - 500MOQ: 1 Piece
-
Small Size Excavator Rubber Tracks Low Noise 230mm X 96mm X 41 LinksUS$ 50 - 500MOQ: 1 Piece
-
Less Vibration Rubber Crawler Tracks With 53 % Metal Parts 7 % Steel CordsUS$ 50 - 500MOQ: 1 Piece
-
250mm Width Excavator Rubber Tracks For Mini Excavator Takeuchi TB23US$ 50 - 500MOQ: 1 Piece
-
Joint Free Mini Caterpillar Tracks , 48mm Pitch Rubber Tank Tracks 250 X 48 X 72 SizeUS$ 50 - 500MOQ: 1 Piece
-
250mm Width Rubber Track for Yanmar Vio Series Excavator (250X48.5KX84)US$ 50 - 500MOQ: 1 Piece
-
Yanmar Mini Excavator Rubber Tracks 84 Link For Construction EquipmentUS$ 50 - 500MOQ: 1 Piece
-
250 * 52.5 * 73 Excavator Rubber Tracks Special For Airmann Ax18.2 / Hitachi Ex20.2US$ 50 - 500MOQ: 1 Piece
