Contact Platform Support
Help Center10G SFP+ to SFP+ Fiber Converter OEO 3R Repeater
Related Products
-
Standalone SFP+ to UTP 10G Media ConverterUS$ 600 - 700MOQ: 1 Piece -
Single Mode to Multimode SFP Fiber Mode ConverterUS$ 17 - 27MOQ: 1 Piece
-
Dual Fiber to Single Fiber Media Converter for 10/100/1000M 155M/622M/STM-1/STM-4US$ 30 - 50MOQ: 1 Piece
-
155M Multimode to Single Mode Fiber Media ConverterUS$ 23 - 33MOQ: 1 Piece
-
2 Ports PON OEO Amplifier GPON RepeaterUS$ 800 - 1000MOQ: 1 Piece
Description:
The 10G Fiber Converter is protocol-independent with dual XFP or SFP+ ports, the 10G fiber converter can provide conversion between different wavelengths or single-mode and multi-mode fiber, single-mode to single-mode fiber or multi-mode to single-strand single-mode fiber.
The device can be used as 10G fiber mode mode or fiber repeater to extend the 10G network distance
The 10G device support SDH/SONET STM-64/OC-192，10G fiber channel，10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
The 10G fiber converter can be used as standalone device with external power or used as plug in card used in BD10 Chasiss.
Features:
Support 2U Rack（16 Slots） and independent use
Support network management （Web SNMP, Console）
Support in-band management
Support ITUT prescribed DWDM/CWDM wavelength
Optical signal regeneration: 3R ( Re-amplify, Reshape, and Retime the signal ) ensures that there is a quality link at 10 Gigabit speeds.
Support Jumbo Frame
Transparent Transpor and very low delay
Support DMI function for SFP+/XFP fiber module
Support Loopback test function
Support PRBS Generator and checker
Support hot plugging
Full State Led display
Easy installation
Specifications:
Equipment function:3R Repeater
Transmission Speed:10Gb/s（9.95Gb/s-11.35Gb/s）
Protocols:10Gbase-R，10Gbase-LRM
Access Type:IEEE802.3ae 10G LAN/ 10G WAN
Interface Type
Type A: SFP+ To/From SFP+
Type B: SFP+ To/From XFP
Type C: XFP To/From XFP
Transmission Distance
Up to SFP＋ module（Max 40Km）
Up to XFP module （Max 80Km）
power requirement
Rack-mountable : AC 85 ～ 220V OR DC -48V
Standalone: AC 220V OR -48V
Power consumption: ≤4W
Work Environment
Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% （non-condensing）
Dimension Card ： 11.5mm （W）× 78mm （D）
Standalone ：156mm （W）×128mm（D）×32mm（H）
Question: Can I input 2Gbps signal into the 10G optical fiber repeater?
Answer: The 10G fiber repeater can only support 9.95Gb/s-11.35Gb/s.If your rate is 2Gbps,you can choose our 2.5G fiber repeater.
Ordering information
| BD-OEO-10G-A | 10G fber converter,3R repeater,type A:SFP+ to SFP+ |
| BD-OEO-10G-B | 10G fiber converter,3R repeater,type B: SFP+ to XFP |
| BD-OEO-10G-C | 10G fiber converter,3R repeater,type C: XFP to XFP |
Send Inquiry to This Supplier
You May Also Like
-
FTTX FTTH 2 PON Ports GEPON OLTUS$ 300 - 380MOQ: 1 Piece
-
Fiber to Home New Version Cost Effective 8Ports GPON OLTUS$ 1150 - 1250MOQ: 1 Piece
-
7-inch 1310/1550nm 24/22dB OTDR Optical Time Domain ReflectometerUS$ 800 - 900MOQ: 1 Piece
-
Pre-polished SC Field Assembly Connector Fast ConnectorUS$ 0.5 - 1MOQ: 1 Piece
-
Pre-polished FC Field Assembly Connector Fast ConnectorUS$ 0.5 - 1MOQ: 1 Piece
-
1x8 PLC Splitter Planar Lightwave Circuit Cassette Module TypeUS$ 5 - 11MOQ: 1 Piece
-
Huawei GPON ONT HG8245 With 2POTS + 4GE + 1USB + 1Wi-FiUS$ 30 - 50MOQ: 1 Unit
-
155M 100KM 1550nm Dual Fiber SFP Optical TransceiverUS$ 15 - 25MOQ: 1 Piece
-
1000Base-T SFP Transceiver Copper RJ45 Module With SGMII InterfaceUS$ 8 - 15MOQ: 1 Piece
-
2.67G 10KM LC DWDM SFP Optical TransceiverUS$ 15 - 25MOQ: 1 Piece
