Contact Platform Support
Help CenterSmall Rubber Track 300*72N*47H for Snowmobile
Related Products
-
Rubber Track 300*71*74 for Yanmar C80r ExcavatorUS$ 656 - 700MOQ: 2 Pieces -
Rubber Track 300*55*82 for Hitachi Ex40UR/Ex40UR. 1/Ex40UR. 2/Ex40urg ExcavatorUS$ 360 - 400MOQ: 2 Pieces
-
Rubber Track 230*48*70 for Mini Excavators/ Skid Steer LoadersUS$ 150 - 160MOQ: 2 Pieces
-
Protective Chain On Excavator Rubber Pads Black Color High PerformanceUS$ 30 - 40MOQ: 2 Pieces
-
Construction Equipment Rubber Track for Skid Steer 180*72*39 TractorUS$ 79 - 85MOQ: 2 Pieces
Our Rubber Track are made from natural rubber. It possesses very good properties of wearing resistance and non-disintegration etc. The adhesion between the rubber and the steel frame is very strong, in addition the replacement is convenient and the service life is long,it is suitable for various snow mobiles
The characteristics of rubber tracks
1.Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks
2.A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks
3.Rubber tracks permit machines to travel at a higher speed than steel tracks
4.Rubber tracks insulated machine and operator from vibraion, exteding the service life of machine and decreasing operator's fatigue
5.The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30 kg/m2, a major reason for its use on wet and soft terrain.
6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.
7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles.
The notices of using rubber tracks
1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases.(Be careful because the rubber crawler may come off if the tension is too low).
2. Avoid projection from the frame around the rubber crawler, especially on its inner circumference.(Rubber crawlers are easily deformed; if it comes into contact with the frame, an accident such the rubber being cut can occur).
3. Avoid sharp projections when traveling.
4.Avoid turning too fast on concrete roads with a high coefficient of frction because this can cause accidents such as cutting the rubber.
5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately.
6. When storing for long periods, keep indoors, away from direct sunshine and rain.
7. Replace as soon as possible when abrasion of sprockets is observed.
| Applicable machines | snow vehicles |
| Material | rubber and steel |
| Specification | WD300*72 |
| Installation position | Installed on the snow mobiles |
Send Inquiry to This Supplier
You May Also Like
-
Bobcat 442ZTS ZX75 Rubber Track Crawler 450*71*86 for ExcavatorUS$ 870 - 890MOQ: 2 Pieces
-
Komatsu Rubber Track B450*86*56c for LoaderUS$ 580 - 600MOQ: 2 Pieces
-
Excavator HITACHI ZX85US EX60 LC.5 TB285 Rubber Track 450*81*78NUS$ 900 - 910MOQ: 2 Pieces
-
Rubber Tracks 130*72*29 for Robotic MachineryUS$ 35 - 40MOQ: 2 Pieces
-
Rubber Track 280*72*47 for Remote Control Robot Lawn MowerUS$ 168 - 180MOQ: 2 Pieces
-
Rubber Track 450*81W*76 for Takeuchi, Hitachi ExcavatorUS$ 770 - 790MOQ: 2 Pieces
-
Rubber Track (200*72*42) for Excavator Use/Grey Color AvailableUS$ 120 - 140MOQ: 2 Pieces
-
Excavator/ Bulldozers Rubber Track for (300*109*35N)US$ 260 - 280MOQ: 2 Pieces
-
Rubber Track (450*76*80) for Excavator Komatsu - PC75rUS$ 880 - 900MOQ: 2 Pieces
-
Volvo Ec15rb Rubber Track (230*72*43) for Construction ExcavatorUS$ 125 - 130MOQ: 2 Pieces
