Construction Equipment Rubber Track for Skid Steer 180*72*39 Tractor

 Commodity: Rubber Track (180mm*72mm*39links)

1. Installation of the Rubber Tracks

A. Too small strength: Easily causes jumping teeth, riding a tooth or steering failure of the

guide wheels and supporting wheels and leads to track derailment or escapes.


B. Too large strength: Track wire will be deformed at the elongation by the excessive strain

tensile, which will make the pitch changed, and track core iron and the drive wheels

abnormally worn, also will make teeth touched and the track broken, the machine power loss

larger, track wear exacerbated, belt crack easier as well as the track life shorter. After the track

is strained, the maximum sag distance is 10-15mm, just as the pitch below.


2. Attention

In order to extend the life of rubber tracks, please complete the following work:

A. Never turn urgently on the concrete floor, gravel road, or hard and sharp road, in order to

avoid speeding up the wearing, twisting and chapping of the rubber track.


B. Try not to work in the rotten field, to avoid rubber track skid and wear.


C. When the stones or other objects come into the crawler and chassis, stop immediately,

and clear gravels or obstacles.



3. Warns

A. Do not travel on the road full of footstone, spinous-stone, scrap iron and other objects.

B. Do not drive in the rivers, streams and on the seacast or any rugged road.

C. Do not make the track unilaterial landing.

D. Forbid aggressive driving.

E. Avoid making a turn rapidly, please slow down and make a turn gradually.

About Us:

Our plant mainly produce Rubber Track which are specially good use for these kind of

Machine:Snowbower/Snowmobile, Robot, Wheelchair, (mini)Excavators, Track loaders, Pitch

Paver, Agricultural,Harvester, Dumpers...Etc.

Pattern:

Customers' order:

Workshop: