Contact Platform Support
Help CenterEarth/Soil Pressure Cell
Related Products
Model: CJLY-350
Features:
Can be connection to dynamic strain amplifier and static strain amplifier and collect data
It is waterproof and suitble for test in outdoors and in the field
It is small in size and suitable for analog test in house
Mail Technology Parameters:
Measurement Range: 0.1MPa～5MPa
Sensitivity:≤0.05
Size: Ø28*9 Ø17*8
Wire Connection: input→output:AC→BD
Impedance: 350Ω
Storage:
When open the package, please check the QTY whether is in accordance with QTY listed in delivery note
Test the earth pressure cell by strain instrument and see whether it works normally
Put it in humidity≤80% environment,there shouldn't be corrosive gases and be dry and aeration.
Be careful when carry it
Installation:
It should be covered at point of pressure changes and used to monitor soil pressure of interface. The separation distance in horizontal of earth pressure cells is 3 times than cell separation（≥0.6m),separation distance in horizontal and separation distance in vertical is same.Load side of earth pressure cell should face to soil mass to be measured.When cover it,soil mass near load side of earth pressure cell should be flattening,covered soil should be same as soil around it,but,please get rid of stones,Be carefull to cover and tamp solidly, layer-by-layer.
Send Inquiry to This Supplier
You May Also Like
-
Dynamic Strain AmplifierNegotiableMOQ: 1 Unit -
Float Type Liquid Level SwitchNegotiableMOQ: 1 Unit
-
Dynamic Torque SensorUS$ 782 - 1580MOQ: 2 Units
-
Temperature TransmitterUS$ 41 - 94MOQ: 10 Units
-
Insert Tuning Fork Density MeterUS$ 3736 - 3760MOQ: 1 Unit
-
Turbine Flow MeterUS$ 170 - 1000MOQ: 1 Unit
-
High Frequency Pressure TransmitterNegotiableMOQ: 20 Units
-
Pull String Displacement SensorNegotiableMOQ: 30 Units
-
Submersible Level TransducerNegotiableMOQ: 30 Units
-
Pressure TransmitterNegotiableMOQ: 30 Units
