Api Gate Valve Psb Type 600~2500LBS RTJ, Psb Valve, Gate Valve, RTJ Valve

Gate Valve is used when the need exist for a device that allows an interruption or cut off the flow of a fluid. It is not recommendable to use Gate Valves for flow modulation as the high velocity of the through may result in erosive damage to the wedge and seats when the valve is partially opened. Under normal operating conditions, the valve should remain either fully open or fully closed. Gate Valve is widely used for the medium of water, steam, air, oil, petroleum and petroleum products, nonaggressive fluids.

Applicable Standard

Design Standard: API 602, BS 5352 

Face to Face: Factory’s standard

Flange ends: ASME B16.5 

Inspection and Test: API 598

Products Range

Size: 1/2" ~ 2"(DN15 ~ DN50)

Rating: ANSI 150lb ~ 2500lb

Body Materials: A105,LF2,F91,F11,F22,F304,F304L,F316,F316L,F321,F51, etc.

Operation: Hand wheel

Design Features

Outside screw & Yoke (OS & Y)

Standard or Full Port

Extended stem for Cryogenic service

Integral flange or welding flange options

Bolted Bonnet, Welded Bonnet or pressure seal options