2017 Factory direct suply gas flow wood log carbonization furnaces for sale

2017 Factory direct suply gas flow wood log carbonization furnaces for sale

 Machine introduction OF wood log carbonization furnaces

wood log carbonization furnaces is our new invent, which is also combined type. this kind of carbonization stove are included three inner stove, when one inner stove are finished,  it can be hoisted outside,.  And when the first inner stove are cooling , the other inner stove can be carbonized at the same time, in this way the cooling time can be reduced much, thus, the productive efficiency increase a lot .This type of stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.

Structure of wood log carbonization furnaces

 1. heating parts includes three heating room , furnace body and heat keeping layer and the drought fan 

2. carbonizing parts: consist of four carbonizing tubes, Both of them are made of the heat resistance thermal steel, under the 

drive of the machine

3. gas recycle part: When during the process of carbonizing, there will be some smoke.( can be burning) the smoke can return to the

furnace through tube for purifying, after purification , the gas recycle tubes can be flow into the heating room of the main furnace for 

heating the machine again,

4.Smoking purification parts  ( in this machine, there are  two purification  tank, the first one to purify the smoking ( can not burning ), 

and the other one are used to purification the gas smoking when the working process, The smoking through the purification system 

will become water vapor, and it will not pollute the air.

5. controlling parts, the whole machine we will equip one electrical control box to control the three electrical motors.

Type of wood log carbonization furnaces

How to work about wood log carbonization furnaces  ?

When one inner stove have been finished carbonization, we will use the hoisting tools to hoist the inner stove out of the outer stove, then put down the inner stove on earth for natural cooling,  at the same time, we can put another inner stove into the outer stove for the second carbonization,which will save a lot of time, so the productivity increase a lot, it is the ideal choice for mass production of charcoal

The raw material and the final products after carbonizing:

Product features:

1.The covers have the function to seal thegas flow type eco-friendly wood charcoal oven;
2.The purifier can purify the gas from the stoves to protect the environment;
The regular wood logs and sawdust briquette, coconut shell, bamboo etc can be put into the inner stoves to carbonize. When one inner stove finishes the carbonizing process, get it out and put into the second stove, the first stove can cool in the nature temperature. Then recycle the process;
3.The hoist equipment can lift the cover and the inner stove out after being carbonized and put the inner stoves into the outer stove.The temperature meter can test the temperature of the inner stove, in order to test the carbonizing ratio. 

 The certification we have got such as CE ISO etc :