Good Quality Used Tyre/Plastic Oil Pyrolysis Plant

Good Quality Used Tyre/Plastic Oil Pyrolysis Plant

Brief Introduction of Good Quality Used Tyre/Plastic Oil Pyrolysis Plant

This used tyre/plastic oil pyrolysis plant is applied to process the tyre scraps into liquid fuel oil, which achieves the high efficiency continuous production with great safety, zero environment performance, good society effect result and economic benefit.

Working Flow of The Good Quality Used Tyre/Plastic Oil Pyrolysis Plant

Firstly, two or three workers put the raw material into the reactor, seal the feed inlet, and then burn the coal /wood in the bottom of the furnace. The waste raw material in the reactor will be heated slowly. The oil steam will be produced when the temperature reach 180°C-400°C. And then the oil steam will be separate to light component and heavy component by separate device. The light component will enter into the condenser and meanwhile the residues will be discharged automatically in succession. After cooling, the liquefied part will be crude oil, and the waste gas (this part cannot be liquefied) will return to heating supply system to be burned by combustion gas purification.

Products From The Good Quality Used Tyre/Plastic Oil Pyrolysis Plant (Material: Waste Tyre)

Customer Concerns

The machine’s installation:

We will give the foundation drawings to buyer after making the order. We will send engineer when buyer gets the machine. The engineer mainly installs the machine and trains your workers.

The machine’s covering area:

The machine itself covers 300-400 square meters (length 20-30M; Width 15M)

Adding raw material stay, carbon black stay, big oil tank zone, workers rest room and simple office, at least 600-800 square meters.

Catalyst formula:

We will supply the catalyst formula after you order the machine; you can buy them at your local.