NA7300,vector network analyzer,electrical network analyzer,network analyzer,300kHz~3GHz

Specifications

NA7300/7100 is mainly applied for Communication, Satellite, Wireless TV & Broadcast and CATV industries.

Overview

NA7300/7100 is mainly applied for Communication, Satellite, Wireless TV & Broadcast and CATV industries.

 

Main Testing Functions

Transmission, Insertion Loss, Gain, Insertion Phase, Isolation, Group Delay, Return Loss, VSWR, Impedance, Center Frequency of Crystal, surface acoustic, 3dB Bandwidth, In-band flatness, Out- band Restrain,  Rectangle Coefficient, Q-Value and so on

 

Features and Benefits

• Two channels, Four traces display
• Fast sweep time
• Save/ print/ recall function
• USB, parallel, RS-232 and VGA,LAN interface
• Automatic PASS/FAIL judgement

Application

NA7300/NA7100 is the best combination of high speed, accuracy, productive and low cost. It helps reduce the testing time, increase output, and lower the overall cost of components. The analyzer is qualified in testing typical RF components such as: Filter, Amplifier, Antennas, Cables, Taps, and Splitters.

Communication: Antenna, Amplifying Module, Coaxial Cable, Connector and so on
Satellite TV: Amplifiers, Spliters and so on
Wireless Broadcasting & TV: Antenna, Transmitter
CATV: Amplifiers, Spliters and so on
Other industries: researching and manufacture of crystal, surface acoustic and cable.

 

Specifications

Model	NA7300	NA7100
Source
Frequency Range	300 kHz ~ 3 GHz	300 kHz ~ 1.3 GHz
Frequency stability	≤±5 ppm	≤±5 ppm
Frequency Resolution	1 Hz	1 Hz
Phase Noise	≤ -65 dBc/Hz @10 kHz	≤-67 dBc/Hz (10 kHz Offset)
Output Level Range	-48 dBm ~ +10 dBm	-50 dBm ~ +10 dBm
Level Accuracy	≤±1.5 dB (-45 dBm ~ +5dBm)	≤±1.5 dB (25 °C+5 °C)
Harmonic Rejection	≥-30 dBc (>1 MHz)	≥-30 dBc(>1 MHz)
	≤-25 dBc (≤1 MHz)	≤-25 dBc(≤1 MHz)
Directivity	≥50 dB (After Vector calibration)	≥50 dB (After Vector calibration)
VSWR	≤1.3	≤1.3
Receiver
Resolution Bandwidth	100 Hz ~ 15 kHz	100 Hz ~ 15 kHz
Dynamic Range	≥100 dB (RBW=1 kHz)	≥100 dB (RBW=1 kHz)
Level Accuracy	≤±1.5 dB	≤±1.5 dB
Measurement Resolution	0.01 dB	0.01 dB
Maximum Input Level	+ 10 dBm	+ 10 dBm
VSWR	≤1.2	≤1.2
Phase
Phase Resolution	0.01 °	0.01 °
Phase Stability	0.5 ° (RBW=1 kHz)	0.5 ° (RBW=1 kHz)
	1 ° (RBW=3 kHz)	1 ° (RBW=3 kHz)
Display
Sweep Time	150 ms/field ~ 20 s/field (201points)	150 ms/field ~ 5 s/field (201points)
Display	7.5” Color TFT LCD	7.5” Color TFT LCD
Measurement
Measurement Channels	2 channels,4 tracks
Measurement Format	A,B,R,A/R,B/R,A/B
Measurement Parameters	Logarithm amplitude, Linearity amplitude, Phase, Group delay, Real part, Imaginary part. VSWR, Smith chart, Pole chart
Interface
Front Panel	Type-N Input and Output port,USB1.1 port
Rear Panel	RS-232, Parallel interface, Standard VGA output and Standard keyboard interface
Others
Power Supply	AC 90 V ~ 250 V / 50 Hz, P≤113 W
Weight	15 kg
Working Environment:	Temperature: -10 °C ~ 40 °C,Humidity: ≤75%
Store Environment:	-10 °C ~ 50 °C
Inside Storage	1 G Byte
Dimension	400 mm × 220 mm × 470 mm